How to service the rear wheel speed sensor on 2000 Dodge Ram 2500 Van?

To maintain the rear wheel speed sensor, jack up the car and unplug the wire from the sensor located on the axle housing. Take the sensor and bracket out with the mounting bolt. Reinstall the sensor, tie the wire and tighten the bolt to 24 Nm before lowering the vehicle.

OEM 2000 Dodge Ram 2500 Van Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2000 Dodge Ram 2500 Van ABS Sensor, Rear Part Number: 56028187AE
$88.72 MSRP: $132.00
You Save: $43.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Rear; Vehicle Speed Sensor; Speed Sensor; Rear Speed Sensor; Sensor Wheel Speed; ABS Wheel Speed Sensor
- Position: Rear
- Replaces: 56028187AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028187AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 2500 Van Vehicle Speed Sensor Part Number: 56028183
Product Specifications
- Other Name: Sensor - Vehicle Speed; Speedometer Sensor; Sensor Vehicle Speed
- Replaced by: 5013660AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.4 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028183
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 2500 Van Speed Sensor Parts and Q&A

Q: How to service the rear wheel speed sensor on 2000 Dodge Ram 2500 Van?
A: To maintain the rear wheel speed sensor, jack up the car and unplug the wire from the sensor located on the axle housing. Take the sensor and bracket out with the mounting bolt. Reinstall the sensor, tie the wire and tighten the bolt to 24 Nm before lowering the vehicle.