How to remove and install the Cruise Control Servo located under the right headlamp on 2000 Dodge Ram 3500 Van?

To remove the speed control servo, disconnect the negative battery cable, remove the engine cover and air cleaner, and disconnect the servo cable. Remove the right headlamp assembly, vacuum hose and electrical connector. After removing the servo, reinstall it reversed from the above steps, and check it for any binding before reconnecting the battery.

OEM 2000 Dodge Ram 3500 Van Cruise Control Servo

Cruise Control Servo Speed

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Servo found

View related parts
2000 Dodge Ram 3500 Van Cruise Servo Part Number: 4669979
Product Specifications
- Other Name: Servo - Speed Control; Cruise Control Servo; Actuator; Servo; Servo Speed Control
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.4 x 4.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4669979
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

2000 Dodge Ram 3500 Van Cruise Control Servo Parts and Q&A

Q: How to remove and install the Cruise Control Servo located under the right headlamp on 2000 Dodge Ram 3500 Van?
A: To remove the speed control servo, disconnect the negative battery cable, remove the engine cover and air cleaner, and disconnect the servo cable. Remove the right headlamp assembly, vacuum hose and electrical connector. After removing the servo, reinstall it reversed from the above steps, and check it for any binding before reconnecting the battery.