How to remove and install the Fuel Level Sensor in the fuel pump module on 2000 Dodge Ram 3500 Van?

Fuel level sensor is fitted on the fuel pump module which is inside the tank and will need the removal of the tank. Unscrew the electrical connector and sensor wires then pull the sensor down. To install, make sure you use proper wire routing then screw it down, then re-connect everything again and reset the tank.

OEM 2000 Dodge Ram 3500 Van Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
2000 Dodge Ram 3500 Van Fuel Gauge Sending Unit Part Number: 5012270AA
Product Specifications
- Other Name: Level Unit - Fuel; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Level Unit Kit Fuel
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.5 x 6.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012270AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Van Fuel Gauge Sending Unit Part Number: 5012269AA
Product Specifications
- Other Name: Level Unit; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Level Unit Kit Fuel
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012269AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 3500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

2000 Dodge Ram 3500 Van Fuel Level Sensor Parts and Q&A

Q: How to remove and install the Fuel Level Sensor in the fuel pump module on 2000 Dodge Ram 3500 Van?
A: Fuel level sensor is fitted on the fuel pump module which is inside the tank and will need the removal of the tank. Unscrew the electrical connector and sensor wires then pull the sensor down. To install, make sure you use proper wire routing then screw it down, then re-connect everything again and reset the tank.