How to Remove and Install a Speed Sensor in the Transmission Tail Housing on 2000 Dodge Viper?

The speed sensor fits in the tail housing of the transmission, in order to remove it, remove the under body stone shield, disconnect the wiring and then remove the mounting bolt. Recheck the O-ring, fit a new sensor, tighten the bolt to 11 Nm, re-connect the wiring, and fit the shield.

OEM 2000 Dodge Viper Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Speed Sensor found

View related parts
2000 Dodge Viper Vehicle Speed Sensor Part Number: 4848214
Product Specifications
- Other Name: Sensor - Vehicle Speed; Sensor Vehicle Speed
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.6 x 1.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4848214
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, Base, GT2, GTS, R/T-10, SRT-10 | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS

2000 Dodge Viper Speed Sensor Parts and Q&A

Q: How to Remove and Install a Speed Sensor in the Transmission Tail Housing on 2000 Dodge Viper?
A: The speed sensor fits in the tail housing of the transmission, in order to remove it, remove the under body stone shield, disconnect the wiring and then remove the mounting bolt. Recheck the O-ring, fit a new sensor, tighten the bolt to 11 Nm, re-connect the wiring, and fit the shield.