How to replace a Blend Door Actuator on 2000 Jeep Cherokee?

Before you can replace the blend door actuator, detach the negative battery cable and cut the connector off of the blend-air door motor. Following that, unscrew the motor from the housing and remove it from the unit. When putting the Blend-Air Door Motor back, do the opposite of the removal procedure, ensuring the screws that secure the motor to the housing are tightened to a torque of 1 Nm (10 in. lbs.) and then link your battery's negative cable.

OEM 2000 Jeep Cherokee Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blend Door Actuators found

View related parts
2000 Jeep Cherokee Actuator Part Number: 4864996
Product Specifications
- Other Name: Actuator - Vacuum; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; Actuator EGR Vacuum; Actuator Vacuum
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.3 x 6.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4864996
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee Actuator Part Number: 4864995
Product Specifications
- Other Name: Actuator - Vacuum; HVAC Floor Mode Door Actuator; HVAC Heater Blend Door Actuator; Actuator EGR Vacuum; Actuator Vacuum
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.4 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4864995
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee Actuator Part Number: 4864994
Product Specifications
- Other Name: Actuator - Vacuum; HVAC Defrost Mode Door Actuator; HVAC Heater Blend Door Actuator; Actuator EGR Vacuum; Actuator Vacuum
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.3 x 4.1 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4864994
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee Blend Door Actuator Parts and Q&A

Q: How to replace a Blend Door Actuator on 2000 Jeep Cherokee?
A: Before you can replace the blend door actuator, detach the negative battery cable and cut the connector off of the blend-air door motor. Following that, unscrew the motor from the housing and remove it from the unit. When putting the Blend-Air Door Motor back, do the opposite of the removal procedure, ensuring the screws that secure the motor to the housing are tightened to a torque of 1 Nm (10 in. lbs.) and then link your battery's negative cable.