How to Maintain a Power Window Switch on 2000 Jeep Cherokee?

To service the power window switch, disconnect the battery negative cable. Remove the door trim panel screws, pry it away, and lift it in order to get to the latch release and lock linkage rods. Unplug the switch, remove the switch with a screwdriver, and re-install by reversing the procedures, being sure to engage the switch correctly.

OEM 2000 Jeep Cherokee Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Window Switch found

View related parts
2000 Jeep Cherokee Window Switch, Black Part Number: 56007218
Product Specifications
- Other Name: Switch - Window; Switch, W/Power Windows, Rear Door, Black, Right; Switch & Bezel Assembly, 1 Gang; Switch, Power Window
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56007218
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Jeep Cherokee Submodels:
- Base, Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee Power Window Switch Parts and Q&A

Q: How to Maintain a Power Window Switch on 2000 Jeep Cherokee?
A: To service the power window switch, disconnect the battery negative cable. Remove the door trim panel screws, pry it away, and lift it in order to get to the latch release and lock linkage rods. Unplug the switch, remove the switch with a screwdriver, and re-install by reversing the procedures, being sure to engage the switch correctly.