How to Maintain a Power Window Switch on 2000 Jeep Grand Cherokee?

In order to service the power window switch, unconnect the battery negative cable and remove the rear door trim panel. Pry the switch receptacle to open the switch, then pull out the switch. To install, place in the new switch, push until it clips into place and the trim panel is reinstalled as well as the battery is reconnected.

OEM 2000 Jeep Grand Cherokee Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Window Switch found

View related parts
2000 Jeep Grand Cherokee Window Switch, Black Part Number: 5HB57DX9AA
Product Specifications
- Other Name: Switch - Power Window; Switch Power Window
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5HB57DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Jeep Grand Cherokee Power Window Switch Parts and Q&A

Q: How to Maintain a Power Window Switch on 2000 Jeep Grand Cherokee?
A: In order to service the power window switch, unconnect the battery negative cable and remove the rear door trim panel. Pry the switch receptacle to open the switch, then pull out the switch. To install, place in the new switch, push until it clips into place and the trim panel is reinstalled as well as the battery is reconnected.