How to Maintain and Fix a Neutral Safety Switch on 2000 Jeep Grand Cherokee?

Raise the vehicle, then set a drain pan beneath the switch before working on it. Remove the switch wires and then take the switch from the case. After that, slide the shift lever to Park and Neutral, so that the operating lever fingers are properly placed in the opening in the case. Service the switch by installing a new seal and securing the switch in the case, tightening it to a torque of 34 Nm (25 ft. lbs.). Check the new switch using a 12V lamp, place the switch wires back together and gently lower the vehicle. Fill the transmission to the top level.

OEM 2000 Jeep Grand Cherokee Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Neutral Safety Switch found

View related parts
2000 Jeep Grand Cherokee Neutral Safety Switch Part Number: 56028181AC
Product Specifications
- Other Name: Switch - Neutral, Safety, Back Up
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028181AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Overland, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Jeep Grand Cherokee Neutral Safety Switch Parts and Q&A

Q: How to Maintain and Fix a Neutral Safety Switch on 2000 Jeep Grand Cherokee?
A: Raise the vehicle, then set a drain pan beneath the switch before working on it. Remove the switch wires and then take the switch from the case. After that, slide the shift lever to Park and Neutral, so that the operating lever fingers are properly placed in the opening in the case. Service the switch by installing a new seal and securing the switch in the case, tightening it to a torque of 34 Nm (25 ft. lbs.). Check the new switch using a 12V lamp, place the switch wires back together and gently lower the vehicle. Fill the transmission to the top level.