JeepParts
My Garage
My Account
Cart
OEM 2000 Jeep Wrangler Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Alternators found
2000 Jeep Wrangler Alternator Part Number: RL005685AC
Product Specifications- Other Name: Alternator - Engine
- Replaces: 56005685AC
- Item Weight: 12.40 Pounds
- Item Dimensions: 8.8 x 7.3 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: RL005685AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Wrangler Alternator Part Number: 56041864AB
Product Specifications- Other Name: Alternator - Engine; Alternators; Generator Engine
- Replaces: 56041565AB, 56041864AA
- Item Weight: 13.90 Pounds
- Item Dimensions: 10.6 x 9.9 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041864AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Wrangler Front Speed Sensor Part Number: 56028686AA
Product Specifications- Other Name: Alternator - Engine; Alternator; Alternators; Generator Engine
- Item Weight: 12.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028686AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Wrangler Alternator Part Number: R6041685AA
Product Specifications- Other Name: Alternator - Engine; Generator Engine
- Item Weight: 8.30 Pounds
- Item Dimensions: 9.5 x 8.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: R6041685AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Wrangler Alternator Part Number: 56005684AB
Product Specifications- Other Name: Alternators; Generator Engine
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56005684AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Jeep Wrangler Alternator Parts and Q&A
- Q: How to Service and Repair an Alternator on 2000 Jeep Wrangler?A: The first thing to do for any alternator service or repair is to disconnect the negative battery cable to avoid any dangers to the electrical components. Release the generator drive belt, take out the pivot and the bolts/nuts, to expose the wire connectors. When possible, unsnap the plastic cover from the B+ terminal. Take off the screw holding the B+ output terminal in place at the rear of the generator and separate the lead. Once that is done, push on the connector tab and then unhook the generator. For installation, assemble the generator then plug the field wire connector into the generator at the rear once it is near the engine. Secure the B+ terminal to the generator mounting stud and tighten the nut on it to 8.5 Nm (75 in. lbs.). Should the car come with a protective cover, place it over the B+ terminal. Fix the generator mounting fasteners and tighten both the generator mounting bolt to 55 Nm (41 ft. lbs.) and the generator pivot bolt/nut to 55 Nm (41 ft. lbs.). Don't push a belt over the pulley rim with a screwdriver to avoid ruining its synthetic material and route the accessory drive belt so that the water pump remains in the proper rotation. In the end, put on the drive belt on the alternator and reconnect the negative battery cable.
Related 2000 Jeep Wrangler Parts
2000 Jeep Wrangler Starter Motor
2000 Jeep Wrangler Alternator Bracket
2000 Jeep Wrangler Battery Tray
2000 Jeep Wrangler Battery Cable
2000 Jeep Wrangler Battery Sensor
2000 Jeep Wrangler Car Batteries