How to Maintain the Hood Latch for Optimal Safety on 2000 Jeep Wrangler?

To service the hood safety latch, raise the hood and remove the attaching bolt. Install the latch by positioning it and securing it with the bolt, tightening to 9 N.m (80 in.lbs.). Finally, remove the support rod and close the hood.

OEM 2000 Jeep Wrangler Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Latches found

View related parts
2000 Jeep Wrangler Safety Catch, Front Part Number: 55176731AF
Product Specifications
- Other Name: Latch - Hood Safety Catch; Hood Safety Catch, Front; Hook Hood Safety Catch
- Position: Front
- Replaces: 55176731AE
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.3 x 2.7 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55176731AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Wrangler Lock, Front Part Number: 55176636AD
Product Specifications
- Other Name: Latch - Hood; Hood Latch, Front; Catch; Catch Hood; Hood Latch
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.2 x 2.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55176636AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Wrangler Hood Latch Parts and Q&A

Q: How to Maintain the Hood Latch for Optimal Safety on 2000 Jeep Wrangler?
A: To service the hood safety latch, raise the hood and remove the attaching bolt. Install the latch by positioning it and securing it with the bolt, tightening to 9 N.m (80 in.lbs.). Finally, remove the support rod and close the hood.