How to Service and Repair a Lash Adjuster with Camshafts Installed on 2001 Chrysler PT Cruiser?

For work on the lifter and lash adjuster, pull off the cylinder head cover, then the cam follower and then loosen the lash adjuster. If reusing the lash adjuster assemblies, mark them and position them on the cams the same way they were before. Before installing the hydraulic lash adjuster, ensure there is some oil in the chambers, determined by no travel of the plunger when you press it-then install the adjuster and put in the cam follower for each one, repeating before you set the cylinder head cover.

OEM 2001 Chrysler PT Cruiser Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2001 Chrysler PT Cruiser Valve Lifters Part Number: 4777976AA
$29.19 MSRP: $37.90
You Save: $8.71 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Valve Lifter; Adjuster Valve Lash
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4777976AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2001 Chrysler PT Cruiser Lash Adjuster Parts and Q&A

Q: How to Service and Repair a Lash Adjuster with Camshafts Installed on 2001 Chrysler PT Cruiser?
A: For work on the lifter and lash adjuster, pull off the cylinder head cover, then the cam follower and then loosen the lash adjuster. If reusing the lash adjuster assemblies, mark them and position them on the cams the same way they were before. Before installing the hydraulic lash adjuster, ensure there is some oil in the chambers, determined by no travel of the plunger when you press it-then install the adjuster and put in the cam follower for each one, repeating before you set the cylinder head cover.