Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Chrysler PT Cruiser Wheel Cover

Wheel Protector
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Covers found

  • 2001 Chrysler PT Cruiser Wheel Cover - SE30PAKAA
    2001 Chrysler PT Cruiser Wheel Cover - SE30PAKAA
    2001 Chrysler PT Cruiser Wheel Cover - SE30PAKAA
    2001 Chrysler PT Cruiser Wheel Cover - SE30PAKAA
    2001 Chrysler PT Cruiser Wheel Cover - SE30PAKAA
    2001 Chrysler PT Cruiser Wheel Cover Diagram - SE30PAKAA
    View related parts

    2001 Chrysler PT Cruiser Center Cap Part Number: SE30PAKAA

    Product Specifications
    • Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap; Cap Wheel Center Machine Finish Aluminum; Cap Wheel Center
    • Position: Center
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 2.1 x 2.1 x 0.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: SE30PAKAA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Chrysler PT Cruiser Submodels:
    • Base, Classic, Couture Edition, Dream, GT, LX, Limited, Touring | 4 Cyl 2.4 L GAS
  • 2001 Chrysler PT Cruiser Wheel Cover - 4656424AD
    2001 Chrysler PT Cruiser Wheel Cover Diagram - 4656424AD
    View related parts

    2001 Chrysler PT Cruiser Wheel Cover Part Number: 4656424AD

    Product Specifications
    • Other Name: Cover - Wheel; Wheel Center Cap; Cover Wheel
    • Replaces: 4656424AC
    • Item Weight: 1.80 Pounds
    • Item Dimensions: 17.2 x 16.7 x 1.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4656424AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Chrysler PT Cruiser Submodels:
    • Base, Dream, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2001 Chrysler PT Cruiser Wheel Cover Parts and Q&A

  • Q: How to Properly Remove and Install a Wheel Cover on 2001 Chrysler PT Cruiser?
    A: Since the wheel cover is very easily damaged by an impact wrench, remove it by hand by un-threading its 5 nuts with a hand wrench. After removing the nuts, grab the wheel's center still cap and pull it directly out from the wheel. While installing, place the valve hole from the wheel cover over the stem of the valve in the wheel. Then use the retaining nuts on the wheel cover instead of the usual wheel nuts. Place the 5 retaining nuts for the wheel over the wheel nuts and insert them by hand. Always use a hand wrench to tighten the retaining nuts so you don't damage them. Tighten all five retaining nuts properly to keep the wheel cover from rattling. Tightening, progress step-by-step, each nut according to the direction shown, supporting it with your foot at least a second time to be certain it won't come loose. If one retaining nut slips, immediately tighten all of them just before it gets to the point where the thread slips again.

Related 2001 Chrysler PT Cruiser Parts

Alternate Year Models

+
2002 Chrysler PT Cruiser Wheel Cover