How to Remove and Install a Camshaft Position Sensor on 2001 Chrysler Sebring?

This sensor is found at the back of the cylinder head. Disconnect the negative battery cable to start and also move and reconnect the PCV hose. After that, take off the connectors from the sensor and remove the screws to take out the camshaft position sensor. Rottle the screw on the rear side of the camshaft that holds the target magnet, remove the screw and take out the magnet. Hold the target magnet in the end of the camshaft, insert its dowels into the corresponding machine holes, attach it with a 3 Nm (30 in. lbs.) torque mounting screw and avoid over-torquing to sidestep breaking the magnet; if you see any cracks, you need to replace the magnet. Insert the camshaft position sensor and tighten its screws to 12.9 Nm (115 in. lbs.). Bind the electrical connector to the camshaft position sensor gently so that the sensor pins are not damaged by an awkward attachment. Afterwards, connect the hose that leads to the PCV and the negative battery cable.

OEM 2001 Chrysler Sebring Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Camshaft Position Sensors found

View related parts
2001 Chrysler Sebring Camshaft Position Sensor Part Number: 68407872AA
$92.96 MSRP: $137.00
You Save: $44.04 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Camshaft Position Sensor; Camshaft Sensor.
- Replaces: 4609089AH, 4609089AF, 4609089AI, 4609089AG, 4609089AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68407872AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Chrysler Sebring Camshaft Position Sensor Part Number: 5093508AA
Product Specifications
- Other Name: Sensor Packkage - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Package Camshaft
- Replaces: 4882851AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.5 x 2.6 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093508AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2001 Chrysler Sebring Ignition Coil Part Number: 5269705AB
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Position Sensor; Cam Sensor; Crankshaft Position Sensor; Sensor Camshaft
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5269705AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Chrysler Sebring Submodels:
- JX, JXi, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Chrysler Sebring Camshaft Position Sensor Part Number: MD327107
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Camshaft
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.2 x 1.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD327107
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS

2001 Chrysler Sebring Camshaft Position Sensor Parts and Q&A

Q: How to Remove and Install a Camshaft Position Sensor on 2001 Chrysler Sebring?
A: This sensor is found at the back of the cylinder head. Disconnect the negative battery cable to start and also move and reconnect the PCV hose. After that, take off the connectors from the sensor and remove the screws to take out the camshaft position sensor. Rottle the screw on the rear side of the camshaft that holds the target magnet, remove the screw and take out the magnet. Hold the target magnet in the end of the camshaft, insert its dowels into the corresponding machine holes, attach it with a 3 Nm (30 in. lbs.) torque mounting screw and avoid over-torquing to sidestep breaking the magnet; if you see any cracks, you need to replace the magnet. Insert the camshaft position sensor and tighten its screws to 12.9 Nm (115 in. lbs.). Bind the electrical connector to the camshaft position sensor gently so that the sensor pins are not damaged by an awkward attachment. Afterwards, connect the hose that leads to the PCV and the negative battery cable.