How to Maintain a Camshaft Position Sensor on Chrysler Sebring?

Before starting on the camshaft sensor, take off the battery cable and unhook the PCV hose, then put it in a different location. After that, separate the electrical connectors from the sensor and unscrew the mounts to allow you to remove the sensor. Twist the screw that holds the target magnet to the rear of the camshaft and take out the magnet. When you mount the magnet, slide it to the end of the camshaft, line up the dowels with the holes and tighten the screw to a torque of 3 Nm (30 in. lbs.) so you don't break the magnet. Put in the camshaft position sensor and make sure the mounting screws have tightened with about 115 in. lbs. (12.9 Nm) torque. Join the connector to the camshaft position sensor straight on, to keep the sensor pins secure and undamaged. Next, join the rubber hose on the PCV Valve back to its original position.

How to Properly Service and Install a Front Camshaft Position Sensor on Chrysler Sebring?

The first step in Front Camshaft Position Sensor service is to lubricate the sensor O-ring. Use a turning motion to fit the camshaft position sensor, but do not drive it into the bore with a screw as this could cause the sensor to sit wrongly and cause the engine to fail. Screw the sensor plates tight, reaching 9 Nm (79.5 in. lbs.). Next, connect the electrical connector to the camshaft position sensor, ensuring it sits straight to keep pin damage from occurring. After that, install the ground cable to the negative battery, then connect the air cleaner back to the throttle body hose and install the inlet air temperature sensor's electrical connector.

OEM Chrysler Sebring Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Camshaft Position Sensors found

View related parts
Chrysler Sebring Camshaft Position Sensor Part Number: 68407872AA
$92.96 MSRP: $137.00
You Save: $44.04 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Camshaft Position Sensor; Camshaft Sensor.
- Replaces: 4609089AH, 4609089AF, 4609089AI, 4609089AG, 4609089AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Camshaft Position Sensor Part Number: 68080819AD
$50.63 MSRP: $75.40
You Save: $24.77 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Camshaft Sensor
- Replaces: 5033308AB, 68080819AB, 68080819AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Crankshaft Position Sensor Part Number: 5029808AD
Product Specifications
- Other Name: Engine Camshaft Position Sensor; Camshaft Position Sensor; Sensor Camshaft
- Replaces: 68013184AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Camshaft Position Sensor Part Number: 5093508AA
Product Specifications
- Other Name: Sensor Packkage - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Package Camshaft
- Replaces: 4882851AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | 2.4L L4
- 1997-1998 Chrysler Sebring
View related parts
Chrysler Sebring Ignition Coil Part Number: 5269705AB
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Position Sensor; Cam Sensor; Crankshaft Position Sensor; Sensor Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002, 1997-1999 Chrysler Sebring | JX, JXi, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Camshaft Position Sensor Part Number: MD327107
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS

Chrysler Sebring Camshaft Position Sensor

Choose OEM Camshaft Position Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Camshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The camshaft position sensor on Chrysler sebring automobiles is an essential component that determines the position of the camshaft as well as its speed. This information is sent to the engine control module, ECM which controls fuel injectors and ignition timing for the optimal performance. Normally, the Camshaft Position Sensor is installed right over the camshaft, although the installation of this component varies by model and may be located behind the cylinder head or near the engine block. Depending on the year and model the Chrysler Sebring vehicles may use different styles Camshaft Position Sensors, sometimes it is combined with crank sensor to keep the correct timing of the pistons and the valves especially in the new generation of engines with variable valve timing. This kind of co-ordination is useful in the right timing of fuel injection and the total efficiency of the engines. Much care should be taken when the Camshaft Position Sensor of the Chrysler Sebring is faulty since its poor condition triggers a huge drag on the.

Chrysler Sebring Camshaft Position Sensor Parts and Q&A

Ignition Coil
5269705AB
Q: How to Maintain a Camshaft Position Sensor on Chrysler Sebring?
A:
Before starting on the Camshaft sensor, take off the Battery Cable and unhook the PCV hose, then put it in a different location. After that, separate the electrical connectors from the sensor and unscrew the mounts to allow you to remove the sensor. Twist the screw that holds the target magnet to the rear of the camshaft and take out the magnet. When you mount the magnet, slide it to the end of the camshaft, line up the dowels with the holes and tighten the screw to a torque of 3 Nm (30 in. lbs.) so you don't break the magnet. Put in the camshaft position sensor and make sure the mounting screws have tightened with about 115 in. lbs. (12.9 Nm) torque. Join the connector to the camshaft position sensor straight on, to keep the sensor pins secure and undamaged. Next, join the rubber hose on the PCV Valve back to its original position.
Camshaft Position Sensor
68080819AD
Q: How to Properly Service and Install a Front Camshaft Position Sensor on Chrysler Sebring?
A:
The first step in Front Camshaft Position Sensor service is to lubricate the sensor O-ring. Use a turning motion to fit the camshaft position sensor, but do not drive it into the bore with a screw as this could cause the sensor to sit wrongly and cause the engine to fail. Screw the sensor plates tight, reaching 9 Nm (79.5 in. lbs.). Next, connect the electrical connector to the camshaft position sensor, ensuring it sits straight to keep pin damage from occurring. After that, install the ground cable to the negative battery, then connect the air cleaner back to the throttle body hose and install the inlet air temperature sensor's electrical connector.