How to Service and Repair a Drive Belt on 2001 Chrysler Sebring?

The first step in servicing the drive belt is to raise the vehicle on a hoist, remove the front wheel and take off the splash shield. Take out the belt from the pulleys by turning the belt tensioner clockwise and then gently release the tensioner. First, remove the air conditioning compressor/generator belt. Then, loosen the pivot and locking bolt/nut, move the pump assembly halfway into the engine and take off the belt. Clear the belt pulleys of foreign material and ensure they are clean of oil, grease and coolant before you install the drive belt. It's recommended to replace the belt when there is considerable wear, damaged cords or clear signs of glazing, yet small cracks on the Poly-V Belt system are nothing to worry about. Correctly guide the drive belt and look for the V-grooves to touch the matching V shapes in the pulley during installation. Place the belts/ribbons correctly on the belt tensioner over every pulley except for the one on the air conditioning compressor; this will allow the belt to span almost all the pulleys. Install this belt onto the air conditioning compressor pulley by first rotating the belt tensioner clockwise, then releasing the spring tension. After that, secure the belt splash shield and right front wheel before lifting the vehicle again. The power steering pump should be fitted onto the pulleys; then set a 1/2" breaker bar into the square opening on the bracket, tighten the power steering bracket by turning clockwise, tighten the adjusting bolt, then the pivot bolt. Lastly, attach the air conditioning compressor/generator belt, the belt splash shield and the right front wheel and only after that bring the vehicle back down to the ground.

OEM 2001 Chrysler Sebring Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Drive Belts found

View related parts
2001 Chrysler Sebring Serpentine Belt Part Number: 4792746AB
$22.88 MSRP: $57.85
You Save: $34.97 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator And A/C Compress; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Alternator And A/C Compressor
- Item Weight: 0.80 Pounds
- Item Dimensions: 12.5 x 4.7 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792746AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS
View related parts
2001 Chrysler Sebring Serpentine Belt Part Number: MN187016
$57.60 MSRP: $91.25
You Save: $33.65 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator & Others; Accessory Drive Belt; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Alternator Belt
- Replaces: MN158101
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.5 x 4.9 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN187016
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2001 Chrysler Sebring Serpentine Belt Part Number: MD376691
$33.98 MSRP: $48.75
You Save: $14.77 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator; Accessory Drive Belt; Alternator Belt; Belt Alternator
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD376691
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2001 Chrysler Sebring Serpentine Belt Part Number: 4892748AD
$29.40 MSRP: $38.05
You Save: $8.65 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator And A/C Compress; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 4892748AA, 4892750AA, 4892748AC
- Item Weight: 0.80 Pounds
- Item Dimensions: 20.1 x 4.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892748AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Chrysler Sebring Power Steering Belt Part Number: MD365263
$40.65 MSRP: $51.53
You Save: $10.88 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Power Steering; Accessory Drive Belt; Belt Power Steering
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD365263
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2001 Chrysler Sebring Serpentine Belt Part Number: 4892444AA
Product Specifications
- Other Name: Belt - Power Steering; Accessory Drive Belt; Serpentine Belt Drive Kit; V-Belt; Power Steering Belt; Belt Power Steering; Drive Belt
- Replaces: 4892749AB, 4892749AA
- Item Weight: 1.20 Pounds
- Item Dimensions: 19.4 x 9.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892444AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2001 Chrysler Sebring Serpentine Belt Part Number: MN187017
Product Specifications
- Other Name: Belt - Power Steering; Accessory Drive Belt; Serpentine Belt Drive Kit; V-Belt; Power Steering Belt; Belt Power Steering; Drive Belt
- Item Weight: 1.30 Pounds
- Item Dimensions: 16.3 x 4.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN187017
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS

2001 Chrysler Sebring Drive Belt Parts and Q&A

Q: How to Service and Repair a Drive Belt on 2001 Chrysler Sebring?
A: The first step in servicing the drive belt is to raise the vehicle on a hoist, remove the front wheel and take off the splash shield. Take out the belt from the pulleys by turning the belt tensioner clockwise and then gently release the tensioner. First, remove the air conditioning compressor/generator belt. Then, loosen the pivot and locking bolt/nut, move the pump assembly halfway into the engine and take off the belt. Clear the belt pulleys of foreign material and ensure they are clean of oil, grease and coolant before you install the drive belt. It's recommended to replace the belt when there is considerable wear, damaged cords or clear signs of glazing, yet small cracks on the Poly-V Belt system are nothing to worry about. Correctly guide the drive belt and look for the V-grooves to touch the matching V shapes in the pulley during installation. Place the belts/ribbons correctly on the belt tensioner over every pulley except for the one on the air conditioning compressor; this will allow the belt to span almost all the pulleys. Install this belt onto the air conditioning compressor pulley by first rotating the belt tensioner clockwise, then releasing the spring tension. After that, secure the belt splash shield and right front wheel before lifting the vehicle again. The power steering pump should be fitted onto the pulleys; then set a 1/2" breaker bar into the square opening on the bracket, tighten the power steering bracket by turning clockwise, tighten the adjusting bolt, then the pivot bolt. Lastly, attach the air conditioning compressor/generator belt, the belt splash shield and the right front wheel and only after that bring the vehicle back down to the ground.