How to Service an Oil Pressure Switch on 2001 Chrysler Sebring?

Before servicing the oil pressure sensor, lift your vehicle and set a container to catch the oil under the sensor. Electrically disconnect the oil pressure switch and pull it out of the car. For setup, attach the oil pressure switch and link the electrical connector. Start the vehicle with the lowest setting and operate the engine by the clock or counter for 2 minutes. When it's finished, turn off the engine and look at the oil level, then add more if it's necessary.

OEM 2001 Chrysler Sebring Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2001 Chrysler Sebring Oil Pressure Switch Part Number: 1258A003
$43.38 MSRP: $55.80
You Save: $12.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Oil Pressure Sending Unit
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 1.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1258A003
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2001 Chrysler Sebring Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 2.0L L4, 2.4L L4, 2.5L V6, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2001 Chrysler Sebring Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2001 Chrysler Sebring?
A: Before servicing the oil pressure sensor, lift your vehicle and set a container to catch the oil under the sensor. Electrically disconnect the oil pressure switch and pull it out of the car. For setup, attach the oil pressure switch and link the electrical connector. Start the vehicle with the lowest setting and operate the engine by the clock or counter for 2 minutes. When it's finished, turn off the engine and look at the oil level, then add more if it's necessary.