JeepParts
My Garage
My Account
Cart
OEM 2001 Dodge Durango Coil Springs
Strut Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Coil Springs found
2001 Dodge Durango Spring, Front Part Number: 52039248
Product Specifications- Other Name: Spring - Front Coil; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring Front Coil
- Position: Front
- Item Weight: 14.60 Pounds
- Item Dimensions: 14.3 x 14.3 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52039248
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Spring, Front Part Number: 52039249
Product Specifications- Other Name: Spring - Front Coil; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring Front Coil
- Position: Front
- Item Weight: 12.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52039249
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Spring, Front Part Number: 52039247
Product Specifications- Other Name: Spring - Front Coil; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring Front Coil
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52039247
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Coil Spring, Front Part Number: 52039246
Product Specifications- Other Name: Spring - Front Coil; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring; Spring Front Coil
- Position: Front
- Item Weight: 10.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52039246
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Coil Springs Parts and Q&A
- Q: How to Service Coil Springs on 2001 Dodge Durango?A: The first step for servicing a coil spring is to lift the vehicle and remove the wheel and tire assembly. Unhook the stabilizer bar link from the lower arm of the suspension and take out the shock absorber. Compress the coil spring by placing DD-1278 through the lower arm, coil and shock mounting hole. Afterwards, tighten the lower nut of the tool. After that, take out the lower ball joint nut and use Remover C-4150A to loosen the ball joint from the knuckle. Turn the nut on the spring compressor lower end counterclockwise so it glides off the stud with less spring tension and then withdraw the tool before pulling down the lower suspension arm to get out the spring. After applying the tape, install the isolator pad on the top of the spring and drop the spring into its pocket in the lower suspension arm to confirm good alignment, then tighten the bolt. Place Spring Compressor DD-1278 through the bottom arm socket and upper shock-mounting hole, locking it in place with the tool nut that secures the spring. Lift the lower ball joint into the knuckle, tighten the nut with 127 Nm (94 ft. lbs.) force and place a cotter pin in it. Once you have removed the spring compressor, put the stabilizer bar link on the lower suspension arm, tighten it at 47 Nm (35 ft. lbs.) and lock it. Raise the vehicle and then: Add the shock absorber first, then the wheel and tire and finally remove the support to lower the vehicle.
Related 2001 Dodge Durango Parts
2001 Dodge Durango Ball Joint
2001 Dodge Durango Control Arm
2001 Dodge Durango Steering Knuckle
2001 Dodge Durango Sway Bar Link
2001 Dodge Durango Wheel Bearing
2001 Dodge Durango Wheel Hub
2001 Dodge Durango Bump Stop
2001 Dodge Durango Coil Spring Insulator
2001 Dodge Durango Control Arm Bolt
2001 Dodge Durango Shock Absorber
2001 Dodge Durango Sway Bar Bracket
2001 Dodge Durango Sway Bar Bushing