How to Service and Repair a Right Engine Mount on 2001 Dodge Intrepid?

First, set your car on a hoist and unscrew the nuts that hold the isolator to the mount's top bracket. Set the jack under the frame and place a block of wood below it, close to the engine, then remove the nuts attaching the isolator to the frame's bottom. Jack up the engine just enough so you can remove the isolator with the heat shield. Begin installation by fixing the isolator mount with the heat shield onto the frame, then set the engine into place on the mount. After taking off the jack, close the isolator to frame nuts to 61 Nm (45 ft. lbs.) and set the upper attaching nuts on the mount, tightening each of them to 61 Nm (45 ft. lbs.). After everything else, bring the vehicle down.

OEM 2001 Dodge Intrepid Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Mounts found

View related parts
2001 Dodge Intrepid Front Mount, Driver Side Part Number: 4593287AB
$27.86 MSRP: $160.00
You Save: $132.14 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Left; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Insulator; Mount
- Position: Driver Side
- Item Weight: 4.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593287AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Dodge Intrepid Mounting Bracket, Passenger Side Part Number: 4593182
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Item Weight: 2.20 Pounds
- Item Dimensions: 10.3 x 10.6 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593182
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Dodge Intrepid Front Mount, Passenger Side Part Number: 4593184AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Right, Right; Engine Mount Bracket; Motor Mount; Mount
- Position: Passenger Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 5.4 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593184AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Dodge Intrepid Front Mount, Driver Side Part Number: 4593285AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Left, Left; Engine Mount Bracket; Motor Mount; Mount
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593285AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, R/T, SE | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Dodge Intrepid Mounting Bracket, Driver Side Part Number: 4593245
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593245
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Dodge Intrepid Mount Bracket, Passenger Side Part Number: 4593244
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount Torque Strut; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593244
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
2001 Dodge Intrepid Mount Bracket, Driver Side Part Number: 4593243
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593243
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS

2001 Dodge Intrepid Engine Mount Parts and Q&A

Q: How to Service and Repair a Right Engine Mount on 2001 Dodge Intrepid?
A: First, set your car on a hoist and unscrew the nuts that hold the isolator to the mount's top bracket. Set the jack under the frame and place a block of wood below it, close to the engine, then remove the nuts attaching the isolator to the frame's bottom. Jack up the engine just enough so you can remove the isolator with the heat shield. Begin installation by fixing the isolator mount with the heat shield onto the frame, then set the engine into place on the mount. After taking off the jack, close the isolator to frame nuts to 61 Nm (45 ft. lbs.) and set the upper attaching nuts on the mount, tightening each of them to 61 Nm (45 ft. lbs.). After everything else, bring the vehicle down.