How to Service and Repair Engine Mounts on the Left and Right Sides on 2000 Dodge Intrepid?

You should lift the vehicle on a hoist before accessing the engine mounts for repair or replacement. Take out the attaching nut from the top of the mounting bracket. Unless supported by a jack with a block of wood placed under the engine, the oil pan will not be safe. After that, take out the nuts holding the isolator to the frame. Raise the engine only as much as needed to let you separate the isolator with the heat shield from its mount. To install the isolator mount, first add the heat shield, then place the whole structure on the motorcycle frame and drop the engine onto the isolator mount. After taking off the jack, tighten both the isolator to frame nuts and the upper attaching nuts on the mount wing to 61 Nm (45 ft. lbs.) and you are done. Make sure to lower the vehicle as well. Cracking on the surface of engine hydro-mounts may occur without affecting the engine and requires replacement if the fluid is leaking, after repairing front-end damage or when the isolator is changed.

OEM 2000 Dodge Intrepid Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Mounts found

View related parts
2000 Dodge Intrepid Front Mount, Driver Side Part Number: 4593287AB
$27.86 MSRP: $160.00
You Save: $132.14 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Left; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Insulator; Mount
- Position: Driver Side
- Item Weight: 4.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593287AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Dodge Intrepid Mounting Bracket, Passenger Side Part Number: 4593182
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Item Weight: 2.20 Pounds
- Item Dimensions: 10.3 x 10.6 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593182
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Dodge Intrepid Front Mount, Passenger Side Part Number: 4593184AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Right, Right; Engine Mount Bracket; Motor Mount; Mount
- Position: Passenger Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 5.4 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593184AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Dodge Intrepid Front Mount, Driver Side Part Number: 4593285AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Left, Left; Engine Mount Bracket; Motor Mount; Mount
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593285AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Intrepid Submodels:
- Base, ES, R/T, SE | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Dodge Intrepid Mounting Bracket, Driver Side Part Number: 4593245
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593245
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Dodge Intrepid Mount Bracket, Passenger Side Part Number: 4593244
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount Torque Strut; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593244
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
2000 Dodge Intrepid Mount Bracket, Driver Side Part Number: 4593243
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593243
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS

2000 Dodge Intrepid Engine Mount Parts and Q&A

Q: How to Service and Repair Engine Mounts on the Left and Right Sides on 2000 Dodge Intrepid?
A: You should lift the vehicle on a hoist before accessing the engine mounts for repair or replacement. Take out the attaching nut from the top of the mounting bracket. Unless supported by a jack with a block of wood placed under the engine, the oil pan will not be safe. After that, take out the nuts holding the isolator to the frame. Raise the engine only as much as needed to let you separate the isolator with the heat shield from its mount. To install the isolator mount, first add the heat shield, then place the whole structure on the motorcycle frame and drop the engine onto the isolator mount. After taking off the jack, tighten both the isolator to frame nuts and the upper attaching nuts on the mount wing to 61 Nm (45 ft. lbs.) and you are done. Make sure to lower the vehicle as well. Cracking on the surface of engine hydro-mounts may occur without affecting the engine and requires replacement if the fluid is leaking, after repairing front-end damage or when the isolator is changed.