How to Maintain and Fix a Power Window Switch on 2001 Dodge Neon?

The first step to working on the power window switch is to disconnect and shut off the battery's negative cable. Place the tip of a special trim stick (C-4755) or any similar tool beneath the window switch bezel and lift the bezel off the panel. Take the wire connector off the switch and remove the two screws found near the switches. Begin your installation by putting in the switch retaining screws, then connect the wire back to the switch. Now, inspect the switch door opening, insert the switch and put the last cable back into place.

OEM 2001 Dodge Neon Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Window Switches found

View related parts
2001 Dodge Neon Window Switch, Passenger Side Part Number: 4793859AA
$25.80 MSRP: $55.50
You Save: $29.70 (54%)
ADD TO CART
Product Specifications
- Other Name: Switch - Power Window; Door Window Switch, Right; Switch Power Window; Door Window Switch
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793859AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Dodge Neon Window Switch Part Number: 4793858AA
Product Specifications
- Other Name: Switch - Power Window; Switch Power Window
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793858AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2001 Dodge Neon Power Window Switch Parts and Q&A

Q: How to Maintain and Fix a Power Window Switch on 2001 Dodge Neon?
A: The first step to working on the power window switch is to disconnect and shut off the battery's negative cable. Place the tip of a special trim stick (C-4755) or any similar tool beneath the window switch bezel and lift the bezel off the panel. Take the wire connector off the switch and remove the two screws found near the switches. Begin your installation by putting in the switch retaining screws, then connect the wire back to the switch. Now, inspect the switch door opening, insert the switch and put the last cable back into place.