How to Maintain a Power Window Switch on 2002 Dodge Neon?

To service the power window switch, disconnect the battery negative cable. Use a trim stick to remove the bezel of the window switch, remove the wire connector and remove the retaining screws. For the installation, do the opposite: install the screws, reconnect the wire, connect the switch and reconnect the battery.

OEM 2002 Dodge Neon Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Window Switches found

View related parts
2002 Dodge Neon Window Switch, Passenger Side Part Number: 4793859AA
$25.80 MSRP: $55.50
You Save: $29.70 (54%)
ADD TO CART
Product Specifications
- Other Name: Switch - Power Window; Door Window Switch, Right; Switch Power Window; Door Window Switch
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793859AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Dodge Neon Window Switch Part Number: 4793858AA
Product Specifications
- Other Name: Switch - Power Window; Switch Power Window
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793858AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2002 Dodge Neon Power Window Switch Parts and Q&A

Q: How to Maintain a Power Window Switch on 2002 Dodge Neon?
A: To service the power window switch, disconnect the battery negative cable. Use a trim stick to remove the bezel of the window switch, remove the wire connector and remove the retaining screws. For the installation, do the opposite: install the screws, reconnect the wire, connect the switch and reconnect the battery.