How to Locate, Remove, and Install a MAP Sensor on 2001 Dodge Ram 1500?

The MAP sensor is attached to the throttle body so it is removed by first removing the air cleaner assembly and unscrewing two mounting bolts. Slide off the rubber fitting and reinstall, attaching to the sensor, placing the sensor on the throttle body and fixing with bolts tightened to 3 Nm (25 in. lbs.).

OEM 2001 Dodge Ram 1500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2001 Dodge Ram 1500 M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029405
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 1500 Submodels:
- Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Ram 1500 MAP Sensor Parts and Q&A

Q: How to Locate, Remove, and Install a MAP Sensor on 2001 Dodge Ram 1500?
A: The MAP sensor is attached to the throttle body so it is removed by first removing the air cleaner assembly and unscrewing two mounting bolts. Slide off the rubber fitting and reinstall, attaching to the sensor, placing the sensor on the throttle body and fixing with bolts tightened to 3 Nm (25 in. lbs.).