How to service A/C Compressor Cut-Out Switches (high-pressure sensor/switch) on 2001 Dodge Ram 2500 Van?

To service the high pressure sensor/switch, remove the battery negative cable and remove the wire harness from the switch on the discharge line. Remove the switch and remove the O-ring. Install a new lubricated O-ring, tighten the switch (7.5 Nm), connect the harness again, connect the battery.

OEM 2001 Dodge Ram 2500 Van A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Compressor Cut-Out Switches found

View related parts
2001 Dodge Ram 2500 Van Pressure Switch Part Number: 4897617AA
Product Specifications
- Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; High Pressure Cut-Off Switch; Switch; Switch A/C High Pressure Cut Off
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897617AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Van Pressure Switch Part Number: 4897612AB
Product Specifications
- Other Name: Switch - A/C Low Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; Switch; Switch A/C Low Pressure Cut Off
- Replaces: 5012330AA, 5012330AB
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 0.9 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897612AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

2001 Dodge Ram 2500 Van A/C Compressor Cut-Out Switches Parts and Q&A

Q: How to service A/C Compressor Cut-Out Switches (high-pressure sensor/switch) on 2001 Dodge Ram 2500 Van?
A: To service the high pressure sensor/switch, remove the battery negative cable and remove the wire harness from the switch on the discharge line. Remove the switch and remove the O-ring. Install a new lubricated O-ring, tighten the switch (7.5 Nm), connect the harness again, connect the battery.