JeepParts
My Garage
My Account
Cart
OEM 2001 Dodge Ram 3500 Harmonic Balancer
Engine Harmonic Balancer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Harmonic Balancers found
2001 Dodge Ram 3500 Vibration Damper Part Number: 53020776AB
$254.03 MSRP: $292.00You Save: $37.97 (13%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley
- Item Weight: 10.10 Pounds
- Item Dimensions: 5.9 x 10.4 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020776AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 3500 Vibration Damper Part Number: 53021284AA
Product Specifications- Other Name: Damper - Crankshaft; Engine Harmonic Balancer; Pulley; Damper Crankshaft; Harmonic Balancer
- Item Weight: 12.20 Pounds
- Item Dimensions: 10.5 x 8.1 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021284AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 3500 Crankshaft Pulley Part Number: 53010222
Product Specifications- Other Name: Pulley - Crankshaft; Engine Crankshaft; Serpentine Belt Kit; Harmonic Balancer; Idler Pulley; Drive Pulley; Serpentine Idler Pulley; Pulley; Pulley Crankshaft; Pulley, Drive
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53010222
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 3500 Vibration Damper Part Number: 5011800AA
Product Specifications- Other Name: Damper - Crankshaft; Harmonic Balancer; Pulley; Damper Crankshaft
- Item Weight: 15.00 Pounds
- Item Dimensions: 12.0 x 11.6 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5011800AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 3500 Harmonic Balancer Parts and Q&A
- Q: How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2001 Dodge Ram 3500?A: You should unconnect the battery negative cable as the first step to repairing the harmonic balancer and crankshaft pulley. Take the accessory drive belt off the car, along with the cooling system fan. Then, loosen and remove the vibration damper bolt and its washer at the end of the crakshaft. Use Special Tool 8513 to connect the back of the crankshaft with the nose and use Special Tool 1026 to connect itself onto the vibration damper which you then pull off the crankshaft. It is important to clean away any dirt from the crankshaft nose and vibration damper bore before doing the installation to avoid serious harm. Set the vibration damper on the crankshaft and install it by using the installing tool from Puller Tool Set C-3688. Place the crankshaft bolt and washer into place and lock them in with 244Nm (180-ft. lbs.) torque. Put the accessory drive belt back in place, set the fan shroud and then install and tighten the retainer bolts to 11 Nm (95 in. lbs. of torque). After that, add the cooling fan and attach the battery negative cable once again.
Related 2001 Dodge Ram 3500 Parts
2001 Dodge Ram 3500 Camshaft
2001 Dodge Ram 3500 Camshaft Bearing
2001 Dodge Ram 3500 Coolant Filter
2001 Dodge Ram 3500 Crankshaft Seal
2001 Dodge Ram 3500 Cylinder Head Gasket
2001 Dodge Ram 3500 Engine Mount
2001 Dodge Ram 3500 Exhaust Valve
2001 Dodge Ram 3500 Intake Valve
2001 Dodge Ram 3500 Oil Pan
2001 Dodge Ram 3500 Oil Pan Gasket
2001 Dodge Ram 3500 Oil Pump
2001 Dodge Ram 3500 Rod Bearing