How Should You Properly Service and Repair a Front Seat Belt and Retractor on 2001 Dodge Ram 3500?

While servicing the seat belts or afterward, examine all belts, buckles, screws and pull-back features to see that everything is working well or if it needs repair. Replacing a belt with slashes, rips or frays, fixing twisted belts, tightening unfastened buckles or fasteners and replacing belts with damaged or unsafe buckles, retractors, latch plates or anchor plates are all good ideas. Don't repair any seat belt element-replace it with new parts verified in the Mopar Parts Catalog. In a Standard Cab, start by moving the front seats as close as possible to the headliner, unscrew the screw keeping the lower front seat belt anchor plate in place on the floor near the base of the B-pillar, remove the screw anchoring the front shoulder belt turning loop to the seat height adjustment lever and lift and remove the belt turning loop from the height adjuster. After that, undo the B-pillar trim, unhook the front seat shoulder belt turning loop and lower seat belt anchor plate from the B-pillar, remove the screw holding the retractor in place and remove the shoulder belt and retractor from the B-pillar. On Club/Quad Cab vehicles, take off the front seat back trim cover, undo the retractor cover's screws and then take out the retractor cover from the back of the seat. Later, get rid of the two screws holding the seat belt retractor to the seat back frame and let go of the front shoulder belt and retractor right from the seat back frame. For Standard Cab installation, install the retractor onto the B-pillar, turn the screw so it is secured to the B-pillar at 39 ft lb., secure the front seat shoulder belt turning loop to the B-pillar and the seat's lower belt anchor plate, set the B-pillar trim into place and connect the shoulder belt turning loop to the height adjuster. Fold the cover the front shoulder belt turning loop and fit the seat belt anchor plate into the floor of the B-pillar. Then tighten the mounting screw to 40 Nm (29 ft. lbs.). For Club/Quad Cab models, place the front shoulder belt and retractor onto the seat back frame, install the retractor and tighten the nuts securing it to 16 Nm (12 ft. lbs.), cover the retractor and tighten the nuts securing the cover to 2 Nm (17 in. lbs.) and then put the trim cover back on the front seat back frame.

OEM 2001 Dodge Ram 3500 Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Seat Belts found

View related parts
2001 Dodge Ram 3500 Lap Belt, Front Center Part Number: 5GE47LAZAA
$50.57 MSRP: $97.15
You Save: $46.58 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Tip Half; Seat Belt, Front Center; Seat Belt Assembly; Lap Belt Tip Half
- Position: Front Center
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.5 x 3.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GE47LAZAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Seat Belt Assembly, Rear Inner Part Number: 5EX58SAZ
$56.28 MSRP: $71.35
You Save: $15.07 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Rear Inner; Latch; Seat Belt, Buckle & Buckle; Seat Belt Rear Inner
- Position: Rear Inner
- Item Weight: 0.70 Pounds
- Item Dimensions: 11.2 x 3.1 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX58SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Lap Belt, Rear Inner Part Number: 5EX59SAZ
$58.39 MSRP: $74.01
You Save: $15.62 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Rear Inner; Seat Belt Assembly; Seat Belt, Buckle And Adjuster; Seat Belt Rear Inner
- Position: Rear Inner
- Item Weight: 1.70 Pounds
- Item Dimensions: 11.2 x 3.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX59SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Lap & Shoulder Belt, Front Outer Driver Side Part Number: 5GD71LAZAB
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Left; Seat Belt Assembly; Seat Belt Front Outer
- Position: Front Outer Driver Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 11.4 x 5.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GD71LAZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Lap Belt Part Number: 5EX61SAZ
Product Specifications
- Other Name: Seat Belt - Buckle And Tip; Seat Belt Assembly; Latch; Belt, Lap (Buckle And Tip); Seat Belt Buckle And Tip
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.4 x 5.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX61SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Seat Belt Assembly, Front Inner Part Number: 5GT65LAZAD
Product Specifications
- Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Front Inner; Latch; Seat Belt Front Inner Driver
- Position: Front Inner
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.2 x 2.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT65LAZAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Lap & Shoulder Belt, Front Outer Part Number: 5GT81LAZAA
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Assembly; Seat Belt Front Outer
- Position: Front Outer
- Item Weight: 2.10 Pounds
- Item Dimensions: 11.2 x 8.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT81LAZAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Seat Belt Assembly, Front Center Part Number: 5GE461AZAA
Product Specifications
- Other Name: Seat Belt - Buckle Half; Seat Belt Receptacle, Front Center; Latch; Lap Belt Buckle Half
- Position: Front Center
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 3.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GE461AZAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Seat Belt Assembly Part Number: 5EX64SAZ
Product Specifications
- Other Name: Seat Belt - Buckle Half; Latch; Seat Belt Buckle Half Right Side for Standard Cabs, Manual Seats, Inner Assembly.
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.4 x 5.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX64SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Lap Belt Part Number: 5EX63SAZ
Product Specifications
- Other Name: Seat Belt - Tip Half; Seat Belt Assembly; Belt, Lap (Tip Half); Lap Belt Tip Half
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.3 x 5.4 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX63SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Lap Belt Part Number: 5EX62SAZ
Product Specifications
- Other Name: Seat Belt - Buckle Half; Seat Belt Assembly; Latch; Lap Belt Buckle Half Center.
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.9 x 4.0 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX62SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Seat Belt Assembly Part Number: 5EX60SAZ
Product Specifications
- Other Name: Seat Belt - Buckle And Tip; Latch; Belt, Lap (Two Buckles); Lap Belt Two Buckles
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX60SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Seat Belt Assembly, Front Inner Part Number: 5GT64LAZAC
Product Specifications
- Other Name: Seat Belt - Front Inner; Latch; Seat Belt Front Inner Passenger
- Position: Front Inner
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.1 x 2.4 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT64LAZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Lap & Shoulder Belt, Rear Outer Part Number: 5GT78LAZAC
Product Specifications
- Other Name: Seat Belt - Rear Outer; Seat Belt Lap and Shoulder Belt, Rear; Seat Belt Assembly
- Position: Rear Outer
- Replaces: 5GT78LAZAB
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.4 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT78LAZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
2001 Dodge Ram 3500 Lap & Shoulder Belt, Front Outer Part Number: 5GT80LAZAB
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Assembly
- Position: Front Outer
- Item Weight: 2.20 Pounds
- Item Dimensions: 10.3 x 4.5 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT80LAZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 3500 Lap & Shoulder Belt, Front Outer Passenger Side Part Number: 5GD70LAZAC
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Right; Seat Belt Assembly
- Position: Front Outer Passenger Side
- Item Weight: 2.00 Pounds
- Item Dimensions: 9.2 x 7.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GD70LAZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2001 Dodge Ram 3500 Seat Belt Parts and Q&A

Q: How Should You Properly Service and Repair a Front Seat Belt and Retractor on 2001 Dodge Ram 3500?
A: While servicing the seat belts or afterward, examine all belts, buckles, screws and pull-back features to see that everything is working well or if it needs repair. Replacing a belt with slashes, rips or frays, fixing twisted belts, tightening unfastened buckles or fasteners and replacing belts with damaged or unsafe buckles, retractors, latch plates or anchor plates are all good ideas. Don't repair any seat belt element-replace it with new parts verified in the Mopar Parts Catalog. In a Standard Cab, start by moving the front seats as close as possible to the headliner, unscrew the screw keeping the lower front seat belt anchor plate in place on the floor near the base of the B-pillar, remove the screw anchoring the front shoulder belt turning loop to the seat height adjustment lever and lift and remove the belt turning loop from the height adjuster. After that, undo the B-pillar trim, unhook the front seat shoulder belt turning loop and lower seat belt anchor plate from the B-pillar, remove the screw holding the retractor in place and remove the shoulder belt and retractor from the B-pillar. On Club/Quad Cab vehicles, take off the front seat back trim cover, undo the retractor cover's screws and then take out the retractor cover from the back of the seat. Later, get rid of the two screws holding the seat belt retractor to the seat back frame and let go of the front shoulder belt and retractor right from the seat back frame. For Standard Cab installation, install the retractor onto the B-pillar, turn the screw so it is secured to the B-pillar at 39 ft lb., secure the front seat shoulder belt turning loop to the B-pillar and the seat's lower belt anchor plate, set the B-pillar trim into place and connect the shoulder belt turning loop to the height adjuster. Fold the cover the front shoulder belt turning loop and fit the seat belt anchor plate into the floor of the B-pillar. Then tighten the mounting screw to 40 Nm (29 ft. lbs.). For Club/Quad Cab models, place the front shoulder belt and retractor onto the seat back frame, install the retractor and tighten the nuts securing it to 16 Nm (12 ft. lbs.), cover the retractor and tighten the nuts securing the cover to 2 Nm (17 in. lbs.) and then put the trim cover back on the front seat back frame.