JeepParts
My Garage
My Account
Cart
OEM 2001 Dodge Ram 3500 Wheel Hub
Wheel Axle Hub- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Wheel Hubs found
2001 Dodge Ram 3500 Drum Hub Part Number: 52009839AA
Product Specifications- Other Name: Hub - Wheel; Wheel Hub Repair Kit; Wheel Hub; Hub; Hub Wheel
- Item Weight: 9.80 Pounds
- Item Dimensions: 9.4 x 9.5 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52009839AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 3500 Shock Absorber Part Number: 5017657AA
Product Specifications- Other Name: Hub - Wheel; Wheel Hub; Rotor Hub; Hub Wheel
- Item Weight: 30.80 Pounds
- Item Dimensions: 9.4 x 9.5 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017657AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 3500 Hub & Bearing Part Number: 5015282AA
Product Specifications- Other Name: Hub - Brake; Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Hub And Bearing Brake
- Item Weight: 20.40 Pounds
- Item Dimensions: 9.5 x 9.5 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015282AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 3500 Hub & Bearing Part Number: 5015228AA
Product Specifications- Other Name: Hub - Brake; Wheel Bearing and Hub Assembly; Wheel Hub Assembly; Hub Assembly.; Front Hub & Bearing; Hub & Rotor; Hub And Bearing Brake
- Item Weight: 15.30 Pounds
- Item Dimensions: 5.8 x 10.7 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015228AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Ram 3500 Wheel Hub Parts and Q&A
- Q: How to Service a Wheel Hub on 2001 Dodge Ram 3500?A: Lift and support the vehicle and afterward, remove the wheel and the tire from the hub. Proceed to remove the bolts that fix the caliper adapters to the steering knuckle and carefully take the assembly; you don't want to let the brake hose help support it. Take off the rotor by removing the hub/bearing nut and the wheel studs, then put the hub/bearing aside because the nut is no longer reusable. If the vehicle has an all-wheel antilock system (ABS), look for damage to the teeth of the tone wheel on the hub/bearing during installation; if any teeth are missing or cracked, the full hub/bearing needs replacing. Slide the new hub/bearing on the spindle and put a new hub/bearing nut on, tightening it to either 251 Nm (185 ft. lbs.) for LD 1500 vehicles or 380 Nm (280 ft. lbs.) for HD 2500/3500 vehicles. After that, set the rotor onto the hub/bearing wheel studs and put the caliper assembly on, tightening the adapter bolts to 176 Nm (130 ft. lbs.) if you use an LD 1500 or 285 Nm (210 ft. lbs.) if you are using an HD 2500/3500 model. Connect and tighten the wheels and the tires, lower the car fully and press the brakes a few times to firmly place the brake shoes, so you end up with a dependable pedal for driving.
Related 2001 Dodge Ram 3500 Parts
2001 Dodge Ram 3500 Lug Nuts
2001 Dodge Ram 3500 Wheel Bearing
2001 Dodge Ram 3500 Coil Springs
2001 Dodge Ram 3500 Ball Joint
2001 Dodge Ram 3500 Bump Stop
2001 Dodge Ram 3500 Control Arm
2001 Dodge Ram 3500 Control Arm Bumper
2001 Dodge Ram 3500 Shock Absorber
2001 Dodge Ram 3500 Sway Bar Bracket
2001 Dodge Ram 3500 Sway Bar Bushing
2001 Dodge Ram 3500 Sway Bar Kit
2001 Dodge Ram 3500 Sway Bar Link