How to Service the Rear Door Check on 2001 Jeep Cherokee?

To service the rear door check, remove the door trim panel and use a punch to take out the retaining pin. Remove the nuts and extract the check. For installation, position the check, install and tighten the nuts to 10 N.m, then align and insert the retaining pin.

OEM 2001 Jeep Cherokee Door Check

Front Door Check Strap

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Checks found

View related parts
2001 Jeep Cherokee Door Check, Front Part Number: 55235571AB
$97.61 MSRP: $145.00
You Save: $47.39 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Door Check - Front Door; Check Front Door
- Position: Front
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.1 x 2.8 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 55235571AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2001 Jeep Cherokee Door Check, Rear Part Number: 55075259AB
Product Specifications
- Other Name: Check - Rear Door; Check Rear Door
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.6 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55075259AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Cherokee Door Check Parts and Q&A

Q: How to Service the Rear Door Check on 2001 Jeep Cherokee?
A: To service the rear door check, remove the door trim panel and use a punch to take out the retaining pin. Remove the nuts and extract the check. For installation, position the check, install and tighten the nuts to 10 N.m, then align and insert the retaining pin.