How to service and repair a Rear Door Striker on 2001 Jeep Cherokee?

To service the rear door striker, mark the location of the striker, remove the screws from the striker and remove the striker from the C-pillar. For installing, position the striker on the C-pillar, screw it on and tighten it to a torque of 28 N.m (20 ft.lbs.).

OEM 2001 Jeep Cherokee Rear Door Striker

Rear Door Latch Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rear Door Strikers found

View related parts
2001 Jeep Cherokee Striker Part Number: 55296077
Product Specifications
- Other Name: Striker - Door Latch; Striker Door Latch
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.1 x 2.7 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55296077
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2001 Jeep Cherokee Striker, Front Part Number: 4520288
Product Specifications
- Other Name: Striker - Door Latch; Door Lock Striker Plate, Front; Striker Assembly, Door Latch; Front, Rear, and Door Strikers; Latch options available.
- Position: Front
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.0 x 4.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4520288
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Cherokee Rear Door Striker Parts and Q&A

Q: How to service and repair a Rear Door Striker on 2001 Jeep Cherokee?
A: To service the rear door striker, mark the location of the striker, remove the screws from the striker and remove the striker from the C-pillar. For installing, position the striker on the C-pillar, screw it on and tighten it to a torque of 28 N.m (20 ft.lbs.).