How to Perform a Seat Switch Replacement for the Passenger Seat on 2001 Jeep Grand Cherokee?

You should begin by isolating the battery's negative cable before trying to remove the passenger seat switch. If your vehicle has ten-way power seats and power recliners, slide the trim stick or suitable wide flat-bladed tool between the seat switch and the stem to pry them off. Take out the three fasteners holding the outboard seat cushion shield to the frame, then move the shield sideways to unplug the power seat switch wire harness from the power seat switch connector. After that, unscrew the power seat switch from inside the outboard seat cushion side shield and pull out the switch. Slide the new power seat switch onto the back of the outboard side of the seat cushion shield and attach it using the two screws and a 1.5 Nm/14 in. lbs. torque. Match the power seat wire harness connector to the power seat switch connector receptacle and then correctly place and screw the outboard seat cushion side shield onto the seat cushion frame until it is tightened to 1.5 Nm (14 in. lbs.). If you have a ten-way power seat, fit both switch knobs onto your switch stems and make sure they are securely fastened by pushing hard until you hear the switches snap. After that, reattach the negative cable to the battery post.

OEM 2001 Jeep Grand Cherokee Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Seat Switches found

View related parts
2001 Jeep Grand Cherokee Control Switch, Front Part Number: 56049777AA
$110.98 MSRP: $166.00
You Save: $55.02 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front, Front Left; Switch Assembly; Seat Switch; Adjust Handle; Switch; Switch Power Seat; Power Seat Switch
- Position: Front
- Replaces: 4373666
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.9 x 3.9 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049777AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Base, Laredo, Limited, Orvis, Overland, SE, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, EKY
View related parts
2001 Jeep Grand Cherokee Control Switch, Passenger Side Part Number: 4601756AC
$26.67 MSRP: $84.50
You Save: $57.83 (69%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front Right, Right; Power Seat Switch; Seat Switch; Switch
- Position: Passenger Side
- Replaces: 4601756AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.3 x 3.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4601756AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Jeep Grand Cherokee Control Switch, Driver Side Part Number: 4601757AC
$96.02 MSRP: $146.00
You Save: $49.98 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front Left, Left; Power Seat Switch; Switch Assembly; Seat Switch; Adjust Handle; Adjuster Switch; Switch
- Position: Driver Side
- Replaces: 4601757AB, 5191951AA
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.6 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4601757AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Jeep Grand Cherokee Switch Part Number: 56033017AB
$60.49 MSRP: $76.68
You Save: $16.19 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.4 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56033017AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Jeep Grand Cherokee Switch Part Number: 56033019AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.9 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56033019AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Jeep Grand Cherokee Control Switch, Iris, Front Passenger Side Part Number: 4601756
Product Specifications
- Other Name: Switch Assembly, Seat; Power Seat Switch, Front Right, Right; Switch Assembly; Power Seat Switches and Memory Selector for Right Seat Adjustment.
- Position: Front Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4601756
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Orvis, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Jeep Grand Cherokee Seat Switch Parts and Q&A

Q: How to Perform a Seat Switch Replacement for the Passenger Seat on 2001 Jeep Grand Cherokee?
A: You should begin by isolating the battery's negative cable before trying to remove the passenger seat switch. If your vehicle has ten-way power seats and power recliners, slide the trim stick or suitable wide flat-bladed tool between the seat switch and the stem to pry them off. Take out the three fasteners holding the outboard seat cushion shield to the frame, then move the shield sideways to unplug the power seat switch wire harness from the power seat switch connector. After that, unscrew the power seat switch from inside the outboard seat cushion side shield and pull out the switch. Slide the new power seat switch onto the back of the outboard side of the seat cushion shield and attach it using the two screws and a 1.5 Nm/14 in. lbs. torque. Match the power seat wire harness connector to the power seat switch connector receptacle and then correctly place and screw the outboard seat cushion side shield onto the seat cushion frame until it is tightened to 1.5 Nm (14 in. lbs.). If you have a ten-way power seat, fit both switch knobs onto your switch stems and make sure they are securely fastened by pushing hard until you hear the switches snap. After that, reattach the negative cable to the battery post.