How to Service an Oil Pressure Switch on 2002 Chrysler 300M?

To service the oil pressure sender, jack the car up and place an oil container beneath the car. Disconnect the electrical connector, unscrew the switch with a wrench and apply Mopar Thread Sealant before re-installing. Reconnect the connector and bring the vehicle down, and start the engine - check for leaks and adjust the oil level if required.

OEM 2002 Chrysler 300M Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2002 Chrysler 300M Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler 300M Submodels:
- Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS

2002 Chrysler 300M Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2002 Chrysler 300M?
A: To service the oil pressure sender, jack the car up and place an oil container beneath the car. Disconnect the electrical connector, unscrew the switch with a wrench and apply Mopar Thread Sealant before re-installing. Reconnect the connector and bring the vehicle down, and start the engine - check for leaks and adjust the oil level if required.