How to service an Oil Pressure Switch on 2003 Chrysler 300M?

To service the oil pressure sender, lift the vehicle and put an oil container under the vehicle. Disconnect the electric connector, unscrew the switch and put Mopar Thread Sealant on the new switch prior to installation. Reconnect the connector, lower the vehicle, start the engine and check for leaks and oil level.

OEM 2003 Chrysler 300M Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2003 Chrysler 300M Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Chrysler 300M Submodels:
- Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS

2003 Chrysler 300M Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2003 Chrysler 300M?
A: To service the oil pressure sender, lift the vehicle and put an oil container under the vehicle. Disconnect the electric connector, unscrew the switch and put Mopar Thread Sealant on the new switch prior to installation. Reconnect the connector, lower the vehicle, start the engine and check for leaks and oil level.