How to Remove and Install a Speed Sensor on the Rear Wheel on 2002 Chrysler 300M?

The rear wheel speed sensor requires removal of the wire harness in the passenger compartment by removing the rear seat. Dismantle the sensor cable, lift the vehicle and take out the rear wheel. Disattach the sensor and routing bracket and remove the new sensor and parts, making sure they have the correct torque and connection. Perform a road test later.

OEM 2002 Chrysler 300M Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2002 Chrysler 300M Speed Sensor Part Number: 4800879
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Vehicle Speed Sensor; Speedometer Sensor; Input Sensor; Output Sensor; Sensor; Sensor Transmission Output Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 1.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4800879
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler 300M Submodels:
- Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
2002 Chrysler 300M Speed Sensor, Rear Driver Side Part Number: 4779155AB
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; ABS Wheel Speed Sensor, Rear Left; ABS Sensor; Rear Speed Sensor
- Position: Rear Driver Side
- Replaces: 4779155AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.1 x 8.0 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4779155AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler 300M Submodels:
- Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS

2002 Chrysler 300M Speed Sensor Parts and Q&A

Q: How to Remove and Install a Speed Sensor on the Rear Wheel on 2002 Chrysler 300M?
A: The rear wheel speed sensor requires removal of the wire harness in the passenger compartment by removing the rear seat. Dismantle the sensor cable, lift the vehicle and take out the rear wheel. Disattach the sensor and routing bracket and remove the new sensor and parts, making sure they have the correct torque and connection. Perform a road test later.