How to Effectively Remove and Install an Oxygen Sensor in an Engine on Chrysler Prowler?

Located in the exhaust manifolds and at the outlet ends of the two catalytic converters, the engine has two upstream and two downstream oxygen sensors. Make sure the engine is cool before you remove any oxygen sensors, as the exhaust manifold, pipes and catalytic converter may be very hot. Disconnect the electrical connector from the heated oxygen sensor before pulling on the wire itself. Take out the wheel bolts using the features of a Snap-On YA8875 tool or a C4907A special tool. On the downstream oxygen sensors, hold up the car, remove the wire connector and take out the sensor with the Snap-On oxygen sensor wrench (number YA 8875). Following removal, use an 18 mm X 1.5 + 6E tap to clean the threads of the exhaust manifold. For the original sensor, apply anti-seize compound Loctite 771-64 to the threads, but don't add anything extra to factory-coated new sensors. Set the sensor at 28 Nm (20 ft. lbs.) and then place the electrical connector back onto the sensor. You should first tighten the O2S to 28 Nm (20 ft. lbs.) before you connect the wire connector and then lower the vehicle.

OEM Chrysler Prowler Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oxygen Sensor found

View related parts
Chrysler Prowler Oxygen Sensor, Front Part Number: 4606133AC
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Rear; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS

Chrysler Prowler Oxygen Sensor

Choose OEM Oxygen Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Oxygen Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Prowler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Prowler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Prowler Oxygen Sensor is commonly known as one of the key items that prove the dependability of the unique Prowler models by Chrysler. Dependent upon reading the unburned oxygen levels in the engine exhaust, this Oxygen Sensor is a vital component in the series of operations that help to maintain the most effective air-fuel mixture for the highest possible fuel economy and the lowest possible emissions. Chrysler Prowler automobile normally incorporates the state-of-the-art zirconium dioxide-based Oxygen Sensors; they come in the narrow-band and the wide-band types, which help control the air-fuel mixture ratio implicitly. Due to this feedback mechanism the operation becomes a closed loop, a fact that enhances catalytic converters and also vehicle performance. Chrysler Prowler Oxygen Sensor is suitable for several Prowler series, which makes it an important component part for the car's proper functioning. The Oxygen Sensor itself is one of the vital components of an automobile's fuel system, as its poor condition affects both safety and emissions standards: this means that its maintenance should be as regular as possible; Critically, some of the Chrysler Prowler design aspects like the front, open, Indy racer styled wheels and that it is made out of aluminum as light as possible serve to blend in with the functionality of Oxygen Sensor to create an upgraded driving experience. Credible performance and efficiency which the Chrysler Prowler Oxygen Sensor provides separates him/her in the automotive market to ensure that every unit of the Chrysler Prowler will remain a pro at highway tracks.

Chrysler Prowler Oxygen Sensor Parts and Q&A

Oxygen Sensor, Front
4606133AC
Q: How to Effectively Remove and Install an Oxygen Sensor in an Engine on Chrysler Prowler?
A:
Located in the Exhaust Manifolds and at the outlet ends of the two Catalytic Converters, the engine has two upstream and two downstream oxygen sensors. Make sure the engine is cool before you remove any oxygen sensors, as the exhaust manifold, pipes and catalytic converter may be very hot. Disconnect the electrical connector from the heated oxygen sensor before pulling on the wire itself. Take out the wheel bolts using the features of a Snap-On YA8875 tool or a C4907A special tool. On the downstream oxygen sensors, hold up the car, remove the wire connector and take out the sensor with the Snap-On oxygen sensor wrench (number YA 8875). Following removal, use an 18 mm X 1.5 + 6E tap to clean the threads of the exhaust manifold. For the original sensor, apply anti-seize compound Loctite 771-64 to the threads, but don't add anything extra to factory-coated new sensors. Set the sensor at 28 Nm (20 ft. lbs.) and then place the electrical connector back onto the sensor. You should first tighten the O2S to 28 Nm (20 ft. lbs.) before you connect the wire connector and then lower the vehicle.