How to Properly Remove and Install Piston Assemblies in an Engine on 2002 Chrysler Prowler?

To remove the piston, remove the cylinder heads and oil pan and then use a ridge reamer on the cylinder bores. Remove the pistons and rods from the top marking them if necessary. Check and replace connecting rod bolts if necessary, staggered ring gaps and ensured proper installation before reinstalling cylinder heads and oil pan.

OEM 2002 Chrysler Prowler Piston

Engine Pistons

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Piston found

View related parts
2002 Chrysler Prowler Piston Part Number: R5010335AB
Product Specifications
- Other Name: Piston Pin And Rod
- Replaces: 5010335AB
- Item Weight: 3.10 Pounds
- Item Dimensions: 12.9 x 5.8 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: R5010335AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Prowler Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2002 Chrysler Prowler Piston Parts and Q&A

Q: How to Properly Remove and Install Piston Assemblies in an Engine on 2002 Chrysler Prowler?
A: To remove the piston, remove the cylinder heads and oil pan and then use a ridge reamer on the cylinder bores. Remove the pistons and rods from the top marking them if necessary. Check and replace connecting rod bolts if necessary, staggered ring gaps and ensured proper installation before reinstalling cylinder heads and oil pan.