How to Service the Exhaust Pipe on a 2.7L Engine on 2002 Chrysler Sebring?

Before working on the cross-under pipe on a 2.7L engine, make sure the exhaust has cooled, given that its temperature is very high at the catalytic converter. To start, jack up the car and disconnect the downstream oxygen sensor wiring harnesses. Following this, undo the oil pan to the transmission structural collar and remove the exhaust system pipe from the cross-under pipe. Take out the fasteners that join the cross-under pipe to the catalytic converters before taking the pipe out. During installation, set a new gasket below the rear catalytic converter and, if fitting a new cross-under pipe, move the oxygen sensors to it. Tighten the cross-under pipe onto the catalytic converters so the nuts are all equal by using just your hands. For the nuts of the cross-under pipe to the rear catalytic converter, apply 28 Nm (250 inch lbs.) and do the same for the front catalytic converter nuts. Attach the exhaust pipe to the cross-under pipe and then align them with 28 Nm (250 inch lbs.) of torque on the attaching fasteners. Slip the oil pan back onto the transmission's structural collar, connect the backside oxygen sensors to their connectors and then gently lower the vehicle.

OEM 2002 Chrysler Sebring Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Exhaust Pipes found

View related parts
2002 Chrysler Sebring Muffler & Pipe Part Number: 4578211AB
$253.15 MSRP: $484.00
You Save: $230.85 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Resonator; Muffler; Muffler And Tailpipe Exhaust
- Item Weight: 20.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578211AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2002 Chrysler Sebring Muffler & Pipe Part Number: 4764842AF
$263.46 MSRP: $504.00
You Save: $240.54 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Direct-Fit Exhaust Assembly; Exhaust System Kit; Resonator; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 4764842AC, 4764842AE, 4764842AD
- Item Weight: 19.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764842AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- GTC, LX, LXi, Limited, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2002 Chrysler Sebring Muffler & Pipe Part Number: 4764604AC
$80.07 MSRP: $145.00
You Save: $64.93 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Muffler W/Tpipe; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 4764604AB
- Item Weight: 18.30 Pounds
- Item Dimensions: 106.0 x 51.5 x 52.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764604AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2002 Chrysler Sebring Resonator & Pipe Part Number: 4764930AD
$178.97 MSRP: $257.00
You Save: $78.03 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Resonator Assembly; Exhaust Pipe; Resonator; Intermediate Pipe; Resonator W/Pipe; Pipe And Resonator Exhaust
- Replaces: 4764930AC
- Item Weight: 12.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764930AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2002 Chrysler Sebring Crossover Pipe Part Number: 4764644AE
Product Specifications
- Other Name: Pipe - Exhaust Crossunder; Exhaust Crossover Pipe; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Cross Over Pipe; Pipe Exhaust Crossunder
- Replaces: 4764644AD
- Item Weight: 10.00 Pounds
- Item Dimensions: 26.3 x 8.1 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764644AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Chrysler Sebring Converter & Pipe, Front Part Number: MR552251
Product Specifications
- Other Name: Pipe - Exhaust Front; Catalytic Converter; Exhaust Pipe; Pipe Exhaust Front
- Position: Front
- Item Weight: 18.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR552251
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- LX | 4 Cyl 2.4 L GAS
View related parts
2002 Chrysler Sebring Muffler W/Tpipe Part Number: MR450428
Product Specifications
- Other Name: Muffler; Exhaust Muffler; Exhaust Pipe; Resonator; Muffler Exhaust
- Item Weight: 21.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR450428
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler Sebring Submodels:
- LX, LXi | 6 Cyl 3.0 L GAS
View related parts
2002 Chrysler Sebring Intermediate Pipe Part Number: MR431955
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Intermed Pipe; Pipe Exhaust
- Item Weight: 20.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR431955
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2002 Chrysler Sebring Intermediate Pipe Part Number: MR431953
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Intermed Pipe; Pipe Exhaust
- Item Weight: 18.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR431953
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2002 Chrysler Sebring Catalytic Converter, Front Part Number: MR281020
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Crossover Pipe, Front; Exhaust Pipe; Front Pipe; Pipe Exhaust Front
- Position: Front
- Item Weight: 27.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR281020
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- LX, LXi | 6 Cyl 3.0 L GAS
View related parts
2002 Chrysler Sebring Catalytic Converter Part Number: 4764618AC
Product Specifications
- Other Name: Converter - Catalytic; Converter Catalytic
- Item Weight: 14.60 Pounds
- Item Dimensions: 41.4 x 10.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764618AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS
View related parts
2002 Chrysler Sebring Resonator & Pipe Part Number: 4764607AD
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Intermediate Pipe; Resonator W/Pipe; Pipe And Resonator Exhaust
- Replaces: 4764607AC
- Item Weight: 11.60 Pounds
- Item Dimensions: 74.2 x 18.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764607AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Chrysler Sebring Muffler & Pipe Part Number: 4578330AA
Product Specifications
- Other Name: Muffler - Exhaust; Direct-Fit Exhaust Assembly; Exhaust System Kit; Resonator; Muffler W/Tpipe; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 4764606AB, 4764606AC, 4764606AD
- Item Weight: 19.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578330AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Chrysler Sebring Muffler W/Tpipe Part Number: 4764840AC
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 4764840AB
- Item Weight: 20.20 Pounds
- Item Dimensions: 55.7 x 19.6 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764840AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2002 Chrysler Sebring Exhaust Pipe Parts and Q&A

Q: How to Service the Exhaust Pipe on a 2.7L Engine on 2002 Chrysler Sebring?
A: Before working on the cross-under pipe on a 2.7L engine, make sure the exhaust has cooled, given that its temperature is very high at the catalytic converter. To start, jack up the car and disconnect the downstream oxygen sensor wiring harnesses. Following this, undo the oil pan to the transmission structural collar and remove the exhaust system pipe from the cross-under pipe. Take out the fasteners that join the cross-under pipe to the catalytic converters before taking the pipe out. During installation, set a new gasket below the rear catalytic converter and, if fitting a new cross-under pipe, move the oxygen sensors to it. Tighten the cross-under pipe onto the catalytic converters so the nuts are all equal by using just your hands. For the nuts of the cross-under pipe to the rear catalytic converter, apply 28 Nm (250 inch lbs.) and do the same for the front catalytic converter nuts. Attach the exhaust pipe to the cross-under pipe and then align them with 28 Nm (250 inch lbs.) of torque on the attaching fasteners. Slip the oil pan back onto the transmission's structural collar, connect the backside oxygen sensors to their connectors and then gently lower the vehicle.