Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2002 Chrysler Sebring Power Steering Pump

Power Steering Pump Unit
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Power Steering Pumps found

  • 2002 Chrysler Sebring Power Steering Pump - 4764421AB
    2002 Chrysler Sebring Power Steering Pump Diagram - 4764421AB
    View related parts

    2002 Chrysler Sebring Power Steering Pump Part Number: 4764421AB

    $202.50 MSRP: $302.00
    You Save: $99.50 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Power Steering; Pump Power Steering
    • Replaces: 4764421AA
    • Item Weight: 3.20 Pounds
    • Item Dimensions: 7.1 x 5.3 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4764421AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Chrysler Sebring Submodels:
    • Base, GTC, LX, LXi, Limited, TSi, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
  • 2002 Chrysler Sebring Power Steering Pump - MN101155
    2002 Chrysler Sebring Power Steering Pump Diagram - MN101155
    View related parts

    2002 Chrysler Sebring Power Steering Pump Part Number: MN101155

    Product Specifications
    • Other Name: Pump - Power Steering
    • Item Weight: 6.10 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: MN101155
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2002 Chrysler Sebring Submodels:
    • LX, LXi | 6 Cyl 3.0 L GAS
  • 2002 Chrysler Sebring Power Steering Pump - 4764718AC
    2002 Chrysler Sebring Power Steering Pump Diagram - 4764718AC
    View related parts

    2002 Chrysler Sebring Power Steering Pump Part Number: 4764718AC

    Product Specifications
    • Other Name: Pump - Power Steering; Pump Power Steering
    • Replaces: 4764718AD, 4764718AB
    • Item Weight: 2.80 Pounds
    • Item Dimensions: 6.9 x 6.6 x 5.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4764718AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Chrysler Sebring Submodels:
    • Base, GTC, LX, LXi, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
  • 2002 Chrysler Sebring Power Steering Pump - MN101149
    2002 Chrysler Sebring Power Steering Pump Diagram - MN101149
    View related parts

    2002 Chrysler Sebring Power Steering Pump Part Number: MN101149

    Product Specifications
    • Other Name: Pump - Power Steering; Pump Power Steering
    • Item Weight: 5.20 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: MN101149
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2002 Chrysler Sebring Submodels:
    • Base, LX | 4 Cyl 2.4 L GAS

2002 Chrysler Sebring Power Steering Pump Parts and Q&A

  • Q: How to Remove a Power Steering Pump from a 2.7L Engine on 2002 Chrysler Sebring?
    A: Isolate the negative battery cable after removing it from its post to protect yourself safely. CHAW, siphon all the power steering fluid out of the remote reservoir before detaching power steering fluid supply hose from the fitting on the pump. Remove the car from the ground and remove the accessory drive splash shield under it. After that, take out the power steering fluid pressure hose from the fitting on the pump and unplug the oxygen sensor harness and clip from the edge of the pump's heat shield. Lift the bolt completely out of the hole in the stamped pump adjuster bracket and remove the power steering drive belt. Move the pump out past where you fully tightened the shaft to find the two bolts that hold the pump bracket to the engine. Get rid of the three bolts that secure the cast power steering pump bracket to the engine, then move out the power steering pump, pulley and brackets together through the gap between the right side frame and driveshaft. Last, take out the two screws where the pump bracket is stamped, the bracket itself and the two bolts to remove the cast mounting bracket from the pump. If you want to remove the pulley, look at the disassembly instructions first.

Related 2002 Chrysler Sebring Parts

Alternate Year Models

+
2001 Chrysler Sebring Power Steering Pump 2003 Chrysler Sebring Power Steering Pump