JeepParts
My Garage
My Account
Cart
OEM 2002 Chrysler Voyager Blower Motor
A/C Heater Blower Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Blower Motors found
2002 Chrysler Voyager Blower Motor, Front Part Number: 4885475AC
$139.38 MSRP: $211.00You Save: $71.62 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly, Front & Rear; Blower Assembly; Motor Blower With Wheel
- Position: Front
- Replaces: 4885475AB
- Item Weight: 4.60 Pounds
- Item Dimensions: 10.0 x 11.5 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885475AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Chrysler Voyager Blower Motor, Rear Part Number: 5019185AA
Product Specifications- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly, Rear; Motor Blower With Wheel
- Position: Rear
- Item Weight: 3.30 Pounds
- Item Dimensions: 10.9 x 8.6 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019185AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Chrysler Voyager Blower Motor Parts and Q&A
- Q: How Can the Blower Motor and Blower Wheel Be Serviced as a Balanced Unit on 2002 Chrysler Voyager?A: A rear blower motor and blower wheel should always be serviced together; they must be replaced if any of them is faulty or if they are damaged. Take out the heater-A/C unit from the vehicle at the start of the process. To use the system in manual temperature mode, pull the rear blower motor pigtail out of the pigtail wire connector, but if the system is set for automatic, place it into a receptacle on the blower power module. Following that, release the blower motor by taking out the three screws from the outboard section of the rear heater-A/C unit housing and remove the blower motor and wheel. For installation, put the blower motor and blower wheel on the outside edge of the back heater-A/C housing and tighten the three screws to 18 in. lbs./2 Nm. Join the rear blower motor wire back to the pigtail, depending on your temperature control and return the rear heater-A/C unit housing to the vehicle.
Related 2002 Chrysler Voyager Parts
2002 Chrysler Voyager Blower Motor Resistor
2002 Chrysler Voyager A/C Accumulator
2002 Chrysler Voyager A/C Clutch
2002 Chrysler Voyager A/C Compressor
2002 Chrysler Voyager A/C Condenser
2002 Chrysler Voyager A/C Expansion Valve
2002 Chrysler Voyager A/C Hose
2002 Chrysler Voyager A/C Switch
2002 Chrysler Voyager Blend Door Actuator
2002 Chrysler Voyager Blower Control Switches
2002 Chrysler Voyager Cabin Air Filter
2002 Chrysler Voyager Heater Core