How to Check and Install a Piston Ring Set on 2002 Dodge Durango?

Look before the reinstallation or installation of the piston rings by cleaning the cylinder bore and inserting the ring 12 mm below the bottom. Clean grooves with feeler gauge, measure end gap. Install the rings one after another and make sure that the mark on the No. 2 ring is upside down and that gaps are in the correct place.

OEM 2002 Dodge Durango Piston Ring Set

Piston Ring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Piston Ring Sets found

View related parts
2002 Dodge Durango Piston Rings Part Number: 5012364AE
Product Specifications
- Other Name: Package Part - Piston; Piston Ring; Ring Package Piston Standard Size; Ring Kit Piston Standard
- Replaces: 5012364AC, 5012364AD
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.3 x 4.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012364AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Adventurer, Base, Limited, SE, SLT, SLT Plus, ST, SXT, Sport | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2002 Dodge Durango Piston Rings Part Number: 4740259
Product Specifications
- Other Name: Ring - Piston; Engine Piston Ring Set; Piston Ring Set; Piston Ring; Ring Set, Piston; Ring Piston
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4740259
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 5.9 L GAS

2002 Dodge Durango Piston Ring Set Parts and Q&A

Q: How to Check and Install a Piston Ring Set on 2002 Dodge Durango?
A: Look before the reinstallation or installation of the piston rings by cleaning the cylinder bore and inserting the ring 12 mm below the bottom. Clean grooves with feeler gauge, measure end gap. Install the rings one after another and make sure that the mark on the No. 2 ring is upside down and that gaps are in the correct place.