How to Maintain and Fix a Shock Absorber on 2002 Dodge Durango?

Start by taking out the upper nut, retainer and grommet from the shock absorber stud. After that, raise the vehicle and remove the bolts of the lower mount as you pull out the shock absorber via the lower suspension arm. After installing, if you keep the original upper shock nut, treat it with Mopar Lock 'N Seal or Loctite 242. Start by fitting the lower retainer and grommet on the shock stud, then cover the shock through the lower suspension arm and up through the upper hole with the collar or boot. After that, put in the lower mounting bolts and fasten them until you reach a torque of 28 Nm (21 ft. lbs.). Once you've pulled out the support and lowered the car, put on the U-stamped upper grommet and retainer to the shock absorber stud. After that, either replace the nut or use Mopar Lock 'N Seal or Loctite 242 on the current one and tighten it to 26 Nm (19 ft. lbs.).

OEM 2002 Dodge Durango Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Shock Absorbers found

View related parts
2002 Dodge Durango Shock Absorber, Rear Part Number: 52106822AE
$45.79 MSRP: $114.00
You Save: $68.21 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Replaces: 52106822AC, 52106822AB, 52106822AD
- Item Weight: 7.50 Pounds
- Item Dimensions: 12.4 x 6.1 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106822AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Durango Shock Absorber, Rear Part Number: 52106931AC
Product Specifications
- Other Name: Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Item Weight: 14.00 Pounds
- Item Dimensions: 18.7 x 2.8 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52106931AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Durango Shock Absorber Part Number: 52113059AA
Product Specifications
- Other Name: Absorber - Suspension; Shock Absorber Suspension Rear
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113059AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Durango Shock Absorber, Front Part Number: 4897393AH
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Front; Suspension Shock Absorber; Shock
- Position: Front
- Item Weight: 4.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897393AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Durango Shock Absorber, Front Part Number: 5015554AD
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Front; Shock
- Position: Front
- Replaces: 5015554AC
- Item Weight: 4.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015554AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 4.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2002 Dodge Durango Shock Absorber Parts and Q&A

Q: How to Maintain and Fix a Shock Absorber on 2002 Dodge Durango?
A: Start by taking out the upper nut, retainer and grommet from the shock absorber stud. After that, raise the vehicle and remove the bolts of the lower mount as you pull out the shock absorber via the lower suspension arm. After installing, if you keep the original upper shock nut, treat it with Mopar Lock 'N Seal or Loctite 242. Start by fitting the lower retainer and grommet on the shock stud, then cover the shock through the lower suspension arm and up through the upper hole with the collar or boot. After that, put in the lower mounting bolts and fasten them until you reach a torque of 28 Nm (21 ft. lbs.). Once you've pulled out the support and lowered the car, put on the U-stamped upper grommet and retainer to the shock absorber stud. After that, either replace the nut or use Mopar Lock 'N Seal or Loctite 242 on the current one and tighten it to 26 Nm (19 ft. lbs.).