JeepParts
My Garage
My Account
Cart
OEM 2002 Dodge Neon Crankshaft Seal
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Crankshaft Seals found
2002 Dodge Neon Rear Main Seal Part Number: 4621939AB
$27.24 MSRP: $40.20You Save: $12.96 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Seal; Seal Rear Main Crankshaft Serviced With Retainer [04663625]; Crankshaft Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.7 x 4.6 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4621939AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Neon Front Crank Seal Part Number: 4667198
$16.36 MSRP: $23.75You Save: $7.39 (32%)Product Specifications- Other Name: Seal - Front Main Crankshaft; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Front Seal; Crankshaft Front Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.6 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4667198
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Neon Timing Cover Gasket Part Number: 4667340AB
Product Specifications- Other Name: Seal - Timing Belt Cover; Engine Timing Cover Gasket; Timing Cover Seal; Front Cover Gasket; Inner Gasket; Seal
- Replaces: 4667340
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.4 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4667340AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Neon Crankshaft Seal Parts and Q&A
- Q: How to Service and Repair a Front Crankshaft Seal on 2002 Dodge Neon?A: Service and repair work on the front crankshaft seal starts with removing the accessory drive belts, then taking out the crankshaft vibration damper and timing belt. Use Special Tool 6793 to get rid of the crankshaft sprocket and then extract the crankshaft sprocket key. Make sure not to damage the shaft seal surfaces or seal bore while you move the motor. Special Tool 6771 can be used to remove the front crankshaft oil seal without harming the seal's contact area on the crankshaft. For assembly, slide the seal in so its spring goes inside the engine and tighten it onto the cover with Special Tool 6780-1. After installing the crankshaft sprocket key, place Special Tool 6792 into the open bore of the crankshaft and fit the crankshaft sprocket to it, with the "front" side visible on the outside. Proper depth for installation of the crankshaft sprocket with Special Tool 6792 is necessary to prevent the timing belt from tracking incorrectly. Next, put back the timing belt, crankshaft vibration damper and accessory drive belts.
Related 2002 Dodge Neon Parts
2002 Dodge Neon Engine Mount
2002 Dodge Neon Oil Filter
2002 Dodge Neon Oil Pan
2002 Dodge Neon Transmission Mount
2002 Dodge Neon Camshaft Seal
2002 Dodge Neon Engine Mount Bracket
2002 Dodge Neon Engine Mount Torque Strut
2002 Dodge Neon Exhaust Valve
2002 Dodge Neon Oil Filter Housing
2002 Dodge Neon Rocker Arm
2002 Dodge Neon Rod Bearing
2002 Dodge Neon Timing Cover Gasket