How to Service and Repair a Crankshaft Seal on 2001 Dodge Neon?

You should remove the transaxle and the flex plate before handling the crankshaft main bearing seal. To remove the crankshaft seal, slide the 3/16 flat blade screwdriver between the dust lip and the metal case, making sure only the chamfer on the crankshaft is touched. Clean off any burrs or scratches on the crankshaft edge using 400 grit sandpaper to make sure the seal is not damaged during installation. You don't have to apply any lubricant while installing the new seal. Hold Special Tool 6926-1 at the crankshaft and set the seal on top, pointing the words THIS SIDE OUT toward the crankcase so that the seal's lip is against the paper gasket. While working, take care not to insert the seal deeper into the block than flush. Place Special Tool 6926-2 on top of C-4171 and push until the tool comes to rest against the edge of the block. Following this, restore the flex plate and the transaxle.

OEM 2001 Dodge Neon Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Seals found

View related parts
2001 Dodge Neon Rear Main Seal Part Number: 4621939AB
$27.24 MSRP: $40.20
You Save: $12.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Seal; Seal Rear Main Crankshaft Serviced With Retainer [04663625]; Crankshaft Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.7 x 4.6 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4621939AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Dodge Neon Front Crank Seal Part Number: 4667198
$16.36 MSRP: $23.75
You Save: $7.39 (32%)
Product Specifications
- Other Name: Seal - Front Main Crankshaft; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Front Seal; Crankshaft Front Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.6 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4667198
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Dodge Neon Timing Cover Gasket Part Number: 4667340AB
Product Specifications
- Other Name: Seal - Timing Belt Cover; Engine Timing Cover Gasket; Timing Cover Seal; Front Cover Gasket; Inner Gasket; Seal
- Replaces: 4667340
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.4 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4667340AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SXT, Sport | 2.0L L4, 4 Cyl 2.0 L GAS

2001 Dodge Neon Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Crankshaft Seal on 2001 Dodge Neon?
A: You should remove the transaxle and the flex plate before handling the crankshaft main bearing seal. To remove the crankshaft seal, slide the 3/16 flat blade screwdriver between the dust lip and the metal case, making sure only the chamfer on the crankshaft is touched. Clean off any burrs or scratches on the crankshaft edge using 400 grit sandpaper to make sure the seal is not damaged during installation. You don't have to apply any lubricant while installing the new seal. Hold Special Tool 6926-1 at the crankshaft and set the seal on top, pointing the words THIS SIDE OUT toward the crankcase so that the seal's lip is against the paper gasket. While working, take care not to insert the seal deeper into the block than flush. Place Special Tool 6926-2 on top of C-4171 and push until the tool comes to rest against the edge of the block. Following this, restore the flex plate and the transaxle.