How to Maintain a Power Window Switch on 2003 Dodge Neon?

Always disconnect and protect the negative terminal on the battery before you start the service. Prying gently up on the switch bezel with a special trim stick or equivalent tool will allow you to remove it from the door panel. Slide the wire connector off the switch and then undo the two screws that secure the switch. First, place the switch retaining screws and then reconnect the wire connector to the switch. Put the switch back in the door trim panel and then finish by linking the battery's negative cable to it.

OEM 2003 Dodge Neon Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Window Switches found

View related parts
2003 Dodge Neon Window Switch, Passenger Side Part Number: 4793859AA
$25.80 MSRP: $55.50
You Save: $29.70 (54%)
ADD TO CART
Product Specifications
- Other Name: Switch - Power Window; Door Window Switch, Right; Switch Power Window; Door Window Switch
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793859AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Window Switch Part Number: 4793858AA
Product Specifications
- Other Name: Switch - Power Window; Switch Power Window
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793858AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2003 Dodge Neon Power Window Switch Parts and Q&A

Q: How to Maintain a Power Window Switch on 2003 Dodge Neon?
A: Always disconnect and protect the negative terminal on the battery before you start the service. Prying gently up on the switch bezel with a special trim stick or equivalent tool will allow you to remove it from the door panel. Slide the wire connector off the switch and then undo the two screws that secure the switch. First, place the switch retaining screws and then reconnect the wire connector to the switch. Put the switch back in the door trim panel and then finish by linking the battery's negative cable to it.