OEM 2002 Dodge Neon Throttle Body

2002 Dodge Neon Throttle Body Parts and Q&A

• Q: How to Service and Repair a Throttle Body on 2002 Dodge Neon?

  A: Begin by cutting off power to the throttle body by removing the negative battery cable. Then, raise the hood of the air cleaner element and lift it out past the ends of the box. Remove the wire from the electrical connection at the throttle body and pull back the clamp on the throttle body outlet hose. Tighten the bolts removing them from the air cleaner box and then detach the cables attached to the throttle body cam. To install, connect the wires to the throttle cam again and then clip them into place on the throttle bracket. Align the throttle body on the air cleaner box and fasten its bolts. After that, attach the clamp again and tighten it on the throttle body outlet hose. Then plug in all the electrical wires to the throttle body. Position the air cleaner element past the lip and install the air cleaner box cover with screws after that. After that, connect the other end of the negative wire to its corresponding post on the battery.