Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2002 Dodge Neon Submodels:
ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
2002 Dodge Neon Vapor Canister Parts and Q&A
Q: How to Service the Vapor Canister in an Emission Control System on 2002 Dodge Neon?
A: Start by hooking up all the necessary tools, then cut the negative battery cable and make the vehicle safely accessible using a jack. Pull the rubber hoses off the EVAP canister and then remove one nut from the bracket to lift the canister out. The canister should be located onto the bracket and held with two nuts, each tightened to 6.7 Nm (60 in. lbs.). After the hoses are connected, fit the EVAP canister and bracket in place and secure the nut to a tightness of 22.4 Nm (250 in. lbs.). After that, set the vehicle lower and secure the negative battery lead.