How to Service and Repair Window Crank Handles on 2002 Dodge Neon?

To service the window crank handles, open the door and use a removal tool to release the lock clip. Remove the handle from the regulator shaft. For installation, position the handle at the 10 o'clock position and the left handle at 2 o'clock, then push to lock it onto the shaft.

OEM 2002 Dodge Neon Window Crank Handles

Window Regulator Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Window Crank Handles found

View related parts
2002 Dodge Neon Window Handle, Slate Gray, Front Part Number: FW80XDV
$33.36 MSRP: $49.50
You Save: $16.14 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Window Regulator; Window Crank Handle, Front, Rear; Regulator Handle; Handle Window Regulator; Window Crank
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.3 x 2.0 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FW80XDV
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Neon Submodels:
- ACR, Base, ES, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Dodge Neon Regulator Handle, Taupe, Front Part Number: FW80WL5
Product Specifications
- Other Name: Handle - Window Regulator; Window Crank Handle, Front, Rear; Handle Window Regulator
- Position: Front
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FW80WL5
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2002 Dodge Neon Window Crank Handles Parts and Q&A

Q: How to Service and Repair Window Crank Handles on 2002 Dodge Neon?
A: To service the window crank handles, open the door and use a removal tool to release the lock clip. Remove the handle from the regulator shaft. For installation, position the handle at the 10 o'clock position and the left handle at 2 o'clock, then push to lock it onto the shaft.