OEM 2002 Dodge Ram 1500 Brake Booster

2002 Dodge Ram 1500 Brake Booster Parts and Q&A

• Q: How to Service a Brake Booster on 2002 Dodge Ram 1500?

  A: Before servicing the booster portion of power brakes, first release the master cylinder and separate the vacuum pipe from the booster. Following that, undo the clip on the booster push rod and take out the nuts holding down the booster studs. Slowly remove the booster and gasket that are inside the front cowl panel. To install, place the booster studs through the cowl panel holes and sit the booster into place on the panel. After adding new nuts to 28 Nm (250 inch lbs.), slot the brake rod into position and hold it in place with the clip. Should the booster check valve be removed, put it in place and connect the vacuum hose to the check valve. After that, attach the master cylinder and fill and bleed the entire brake system.