How to Service and Repair Exhaust Valve and Intake Valves on 2002 Jeep Grand Cherokee?

To perform service on the valve including cleaning of all components, reface valves to specified angle, check seat width and runout. Measure stem-to-guide clearance on valve; ream if needed. Remove and install valves using a compressor tool, lubrication and seating before reinstalling the engine cylinder head.

OEM 2002 Jeep Grand Cherokee Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Exhaust Valves found

View related parts
2002 Jeep Grand Cherokee Exhaust Valve Part Number: 53020748
Product Specifications
- Other Name: Valve - Exhaust; Intake Valve; Valves; Valve Exhaust Standard
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.5 x 5.2 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020748
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, Special Edition, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2002 Jeep Grand Cherokee Exhaust Valve Part Number: 53010513AA
Product Specifications
- Other Name: Valve - Exhaust; Intake Valve; Valves; Valve Exhaust Standard
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.3 x 2.1 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53010513AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Special Edition, Sport | 6 Cyl 4.0 L GAS

2002 Jeep Grand Cherokee Exhaust Valve Parts and Q&A

Q: How to Service and Repair Exhaust Valve and Intake Valves on 2002 Jeep Grand Cherokee?
A: To perform service on the valve including cleaning of all components, reface valves to specified angle, check seat width and runout. Measure stem-to-guide clearance on valve; ream if needed. Remove and install valves using a compressor tool, lubrication and seating before reinstalling the engine cylinder head.