How to Remove and Install the Idle Control Valve on the Throttle Body on 2002 Jeep Grand Cherokee?

To replace the IAC motor on the throttle body, remove the air duct and resonator box first and then disconnect the electrical connector. Remove the two mounting bolts in order to remove the motor. Reinstall by tightening the new motor, 7 Nm torque, reconnect the electrical connector and reinstall the air duct.

OEM 2002 Jeep Grand Cherokee Idle Control Valve

IACV

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Idle Control Valve found

View related parts
2002 Jeep Grand Cherokee Idle Speed Control Part Number: 53030840AC
Product Specifications
- Other Name: Motor - Air Idle Speed; Fuel Injection Idle Control Valve; Idle Control Motor; Idle Speed Control Motor
- Replaces: 53030840AB, 53030840
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030840AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 4.7L V8, 8 Cyl 4.7 L GAS

2002 Jeep Grand Cherokee Idle Control Valve Parts and Q&A

Q: How to Remove and Install the Idle Control Valve on the Throttle Body on 2002 Jeep Grand Cherokee?
A: To replace the IAC motor on the throttle body, remove the air duct and resonator box first and then disconnect the electrical connector. Remove the two mounting bolts in order to remove the motor. Reinstall by tightening the new motor, 7 Nm torque, reconnect the electrical connector and reinstall the air duct.