OEM 2003 Chrysler PT Cruiser Door Lock Switch

2003 Chrysler PT Cruiser Door Lock Switch Parts and Q&A

• Q: How to Replace a Door Lock Switch Cylinder on 2003 Chrysler PT Cruiser?

  A: Before changing the door lock switch, first lift the hood and disconnect the negative cable from the battery. Pull off the front door trim and take out the door lock switch from the lock cylinder. Take the wires and switch out of the door, then carefully cut the wires leading to the switch so that at least three inches is left at their junction with the switch. Today, proceed to solder the new switch, following the information on the Wiring Diagram and then route the door lock switch inside the door panel. Install the switch at the back of the door lock cylinder and replace the front door trim panel after that. Connect the other end of the black battery cable, close the hood and check that everything in the vehicle still works.