How to Maintain and Fix Rod Bearings on 2003 Chrysler PT Cruiser?

Using Plastigage, first check that the connecting rod bearing clearance is within the specifications given. Rod bearing bolts should not be used more than once. Once you get the bolts, coat each thread using clean engine oil before installation. Secure all bolts by hand, after which alternately torque each bolt until the cap is assembled correctly. Apply pressure to the main bolts until they click which is about 28 Nm (after 20 ft. lbs.). In addition, inspect the clearance on the connecting rod end with a feeler gauge.

OEM 2003 Chrysler PT Cruiser Rod Bearing

Engine Connecting Rod Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rod Bearing found

View related parts
2003 Chrysler PT Cruiser Bearings Part Number: 5174612AA
$14.57 MSRP: $24.10
You Save: $9.53 (40%)
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Bearing Kit Connecting Rod Standard See Note; Bearing Kit Connecting Rod Standard
- Replaces: 5093448AB, 5012588AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174612AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2003 Chrysler PT Cruiser Rod Bearing Parts and Q&A

Q: How to Maintain and Fix Rod Bearings on 2003 Chrysler PT Cruiser?
A: Using Plastigage, first check that the connecting rod bearing clearance is within the specifications given. Rod bearing bolts should not be used more than once. Once you get the bolts, coat each thread using clean engine oil before installation. Secure all bolts by hand, after which alternately torque each bolt until the cap is assembled correctly. Apply pressure to the main bolts until they click which is about 28 Nm (after 20 ft. lbs.). In addition, inspect the clearance on the connecting rod end with a feeler gauge.